ACSL-6210-06R Equivalent & Substitute Parts

Part Overview

The ACSL-6210-06R is a Logic Output Optoisolator manufactured by Broadcom Limited, featuring 2.5kV isolation, 2 channels, open collector Schottky clamped output, and 15MBd data rate in an 8-SOIC package. This component is classified as Obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and new design implementations. The substitute part maintains identical electrical and mechanical specifications while offering improved product status and compliance certifications.

Substiute Parts

ACSL-6210-06R

Broadcom LimitedIn Stock: 959ACSL-6210-06R Datasheet

Current PartRFQ

ACSL-6210-06RE

Broadcom LimitedIn Stock: 2110ACSL-6210-06RE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ACSL-6210-06R has one direct substitute: ACSL-6210-06RE. Substitution is based on strict equivalence across all critical electrical and mechanical parameters:

• Isolation Voltage: Both parts maintain 2500Vrms isolation rating
• Channel Configuration: Identical 2-channel architecture with 1 input per side
• Output Characteristics: Both feature open collector Schottky clamped output with 50mA per channel capacity
• Timing Specifications: Propagation delay and rise/fall times are identical
• Supply Voltage Range: Both operate across 3V to 5.5V
• Temperature Range: Identical -40°C to 100°C operating window
• Package: Both use 8-SOIC (0.154", 3.90mm Width) surface mount package
• Common Mode Transient Immunity: Both rated at 10kV/µs minimum

Parameter Comparison

Engineering Selection Recommendations

The ACSL-6210-06RE is the direct substitute for the obsolete ACSL-6210-06R. Both parts are electrically and mechanically identical across all specified parameters. The primary distinction is product status and compliance certification: ACSL-6210-06R is obsolete with RoHS non-compliant status, while ACSL-6210-06RE is active production with ROHS3 compliance. For new designs and ongoing system support, ACSL-6210-06RE is the appropriate selection. For legacy system maintenance requiring the exact original part number, ACSL-6210-06R remains available in inventory (939 pcs), though ACSL-6210-06RE offers superior long-term availability (2100 pcs in stock) and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Are ACSL-6210-06R and ACSL-6210-06RE pin-for-pin compatible? A: Yes. Both parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pinout and electrical characteristics. Direct PCB substitution is possible without layout modifications.

Q: What is the difference between these two parts? A: The parts are electrically and functionally identical. ACSL-6210-06RE is the active production variant with ROHS3 compliance, while ACSL-6210-06R is obsolete and RoHS non-compliant. Both maintain identical isolation voltage (2500Vrms), channel count (2), output type (open collector Schottky clamped), data rate (15MBd), and timing specifications.

Q: Can I use ACSL-6210-06RE in place of ACSL-6210-06R in existing designs? A: Yes. The substitute part meets or exceeds all electrical and mechanical requirements of the original. No circuit modifications are required.

Q: Why is ACSL-6210-06R marked as obsolete? A: Product obsolescence is determined by the manufacturer. ACSL-6210-06RE represents the current production equivalent and is recommended for all new designs and system updates.

Q: Are there any compliance differences I should consider? A: ACSL-6210-06RE carries ROHS3 compliance certification, while ACSL-6210-06R does not. For applications subject to RoHS regulations, ACSL-6210-06RE is the required selection.

Q: What is the isolation voltage rating, and is it the same for both parts? A: Both parts provide 2500Vrms isolation with 10kV/µs common mode transient immunity. Isolation specifications are identical.

Q: Are the propagation delay and timing characteristics the same? A: Yes. Both parts specify maximum propagation delay of 100ns for both tpLH and tpHL, with typical rise and fall times of 30ns and 12ns respectively.