ACPP0805 62R B Equivalent & Substitute Parts

Part Overview

The ACPP0805 62R B is a 62 Ohm ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.1W, manufactured by Ohmite under the ARCOL and ACPP series. This component is active in production with 1152 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design optimization across multiple manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	62 Ohms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	MSL 1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters: resistance value (62 Ohms), tolerance (±0.1%), package format (0805 / 2012 Metric), composition (thin film), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). Substitute parts are categorized as direct equivalents or upgrades based on power rating and additional certifications.

Direct Equivalent: CPF0805B62RE1 matches all electrical and mechanical specifications of the main part, with identical power rating (0.1W) and physical dimensions.

Upgrade Parts: ERA-6AEB620V, RG2012P-620-B-T5, RT0805BRD0762RL, and TNPW080562R0BEEA exceed the minimum power rating requirement (0.125W to 0.26W) and include additional automotive or environmental certifications. These parts are electrically and mechanically compatible while offering enhanced performance margins or specialized features.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op. Temp Range	Package	Height Max (mm)	RoHS Status	Features
ACPP0805 62R B	Ohmite	62 Ω	±0.1%	0.1	±25	-55 ~ 155°C	0805	0.65	ROHS3	—
CPF0805B62RE1	TE Connectivity	62 Ω	±0.1%	0.1	±25	-55 ~ 155°C	0805	0.65	Non-compliant	—
ERA-6AEB620V	Panasonic	62 Ω	±0.1%	0.125	±25	-55 ~ 155°C	0805	0.60	ROHS3	Automotive AEC-Q200
RG2012P-620-B-T5	Susumu	62 Ω	±0.1%	0.125	±25	-55 ~ 155°C	0805	0.50	ROHS3	Anti-Sulfur, Automotive AEC-Q200
RT0805BRD0762RL	YAGEO	62 Ω	±0.1%	0.125	±25	-55 ~ 155°C	0805	0.60	ROHS3	—
TNPW080562R0BEEA	Vishay Dale	62 Ω	±0.1%	0.26	±25	-55 ~ 175°C	0805	0.55	ROHS3	Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant

Engineering Selection Recommendations

For Direct Replacement: CPF0805B62RE1 provides electrical and mechanical equivalence to ACPP0805 62R B. Note that CPF0805B62RE1 carries RoHS non-compliant status; applications requiring ROHS3 compliance should select an alternative.

For Compliance-Critical Applications: ERA-6AEB620V, RG2012P-620-B-T5, RT0805BRD0762RL, and TNPW080562R0BEEA all maintain ROHS3 compliance and are suitable for regulated environments.

For Automotive Applications: ERA-6AEB620V, RG2012P-620-B-T5, and TNPW080562R0BEEA carry AEC-Q200 automotive qualification. RG2012P-620-B-T5 and TNPW080562R0BEEA include anti-sulfur features for enhanced environmental resistance.

For Extended Temperature Range: TNPW080562R0BEEA supports -55°C ~ 175°C operating range, exceeding the standard -55°C ~ 155°C specification.

For Power Margin Enhancement: TNPW080562R0BEEA (0.26W) provides the highest power rating, followed by ERA-6AEB620V, RG2012P-620-B-T5, and RT0805BRD0762RL (0.125W each).

Frequently Asked Questions (FAQ)

Q: Can CPF0805B62RE1 be used as a direct replacement for ACPP0805 62R B?

A: CPF0805B62RE1 is electrically and mechanically equivalent with identical resistance, tolerance, power rating, and package dimensions. However, it carries RoHS non-compliant status, which may restrict use in regulated applications. Verify compliance requirements before selection.

Q: What is the difference between direct equivalents and upgrade parts?

A: Direct equivalents match all specifications of the main part. Upgrade parts exceed minimum power rating requirements or include additional certifications (automotive AEC-Q200, anti-sulfur features, extended temperature range) while maintaining electrical and mechanical compatibility.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical length (2.00mm) and width (1.25mm). Height variations (0.50mm to 0.65mm maximum seated height) are within standard PCB assembly tolerances and do not affect footprint compatibility.

Q: Which substitute part offers the best environmental performance?

A: TNPW080562R0BEEA combines the highest power rating (0.26W), extended operating temperature range (-55°C ~ 175°C), anti-sulfur coating, AEC-Q200 automotive qualification, and moisture-resistant construction.

Q: Can I use a higher power-rated substitute in place of the 0.1W main part?

A: Yes. Higher power-rated parts (0.125W or 0.26W) are electrically compatible and provide additional thermal margin. Physical dimensions remain within PCB assembly standards. Verify that circuit design does not depend on the specific thermal characteristics of the 0.1W rating.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component is not moisture-sensitive and requires no special handling, storage, or baking procedures prior to soldering. All listed substitute parts carry MSL 1 rating.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message