ACPL-W454-560E Equivalent & Substitute Parts

Part Overview

The ACPL-W454-560E is an optoisolator with transistor output manufactured by Broadcom Limited. This component provides 5000Vrms isolation in a 6-SOIC surface mount package and is designed for applications requiring galvanic isolation with DC input and transistor output configuration. The part is currently in active production status with 1420 units available in new original inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product family, ensuring functional interchangeability in circuit designs.

Substiute Parts

ACPL-W454-560E

Broadcom LimitedIn Stock: 1525ACPL-W454-560E Datasheet

Current PartRFQ

ACPL-W454-500E

Broadcom LimitedIn Stock: 7018ACPL-W454-500E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ACPL-W454-560E belongs to the ACPL-W454 base product family. Substitute parts within this family maintain identical electrical specifications across all critical parameters: 5000Vrms isolation voltage, 1-channel configuration, DC input with transistor output, 25%-60% current transfer ratio at 16mA input, 200ns/300ns switching times, 20V maximum output voltage, and 8mA output current per channel. Mechanical compatibility is ensured through identical 6-SOIC surface mount packaging with 6.80mm width. Compliance certifications including ROHS3, MSL Level 1, and REACH Unaffected status are maintained across all qualified substitutes. Substitution is valid when all these parameters remain constant and the part maintains active product status.

Parameter Comparison

Engineering Selection Recommendations

Both ACPL-W454-560E and ACPL-W454-500E are active production parts from Broadcom Limited with identical electrical and mechanical specifications. Selection between these parts may be based on packaging format availability: ACPL-W454-560E is supplied in standard packaging, while ACPL-W454-500E is available in Cut Tape (CT) and Digi-Reel® formats. Both parts maintain full ROHS3 compliance and REACH Unaffected status, making them suitable for applications with environmental and regulatory requirements. Inventory availability should be considered in procurement decisions, with ACPL-W454-500E currently showing higher stock levels at 6997 units compared to 1420 units for ACPL-W454-560E.

Frequently Asked Questions (FAQ)

Q: Can ACPL-W454-500E be used as a direct replacement for ACPL-W454-560E? A: Yes. Both parts share identical electrical parameters including 5000Vrms isolation, 1-channel configuration, 25%-60% current transfer ratio, and 6-SOIC surface mount packaging. They are functionally interchangeable in circuit applications.

Q: What is the difference between these two part numbers? A: The primary difference is packaging format. ACPL-W454-560E uses standard packaging, while ACPL-W454-500E is supplied in Cut Tape (CT) and Digi-Reel® formats for automated assembly processes.

Q: Are there any compliance differences between the substitute parts? A: No. Both parts maintain identical ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status.

Q: What parameters must remain constant for substitution within the ACPL-W454 family? A: Critical parameters include isolation voltage (5000Vrms), number of channels (1), current transfer ratio range (25%-60% @ 16mA), switching times (200ns/300ns), output voltage rating (20V), output current (8mA), and 6-SOIC package configuration.

Q: Can these parts be used in high-temperature applications? A: Both parts are rated for operating temperatures from -55°C to 100°C. Application-specific thermal analysis is required to confirm suitability for specific high-temperature environments.