ACPL-824-060E Equivalent & Substitute Parts

Part Overview

The ACPL-824-060E is a 2-channel optoisolator with transistor output manufactured by Broadcom Limited. This component provides 5000Vrms isolation and is designed for applications requiring galvanic isolation between input and output circuits. The part is currently in active production status with 1046 units available in inventory. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to supply constraints, design flexibility, or application-specific requirements.

Key Parameters

Parameter	Value
Manufacturer Part Number	ACPL-824-060E
Manufacturer	Broadcom Limited
Category	Optoisolators
Number of Channels	2
Voltage - Isolation	5000Vrms
Current Transfer Ratio (Min)	20% @ 1mA
Current Transfer Ratio (Max)	300% @ 1mA
Rise / Fall Time (Typ)	4µs, 3µs
Input Type	AC, DC
Output Type	Transistor
Voltage - Output (Max)	70V
Current - Output / Channel	50mA
Voltage - Forward (Vf) (Typ)	1.2V
Current - DC Forward (If) (Max)	50mA
Vce Saturation (Max)	200mV
Operating Temperature	-30°C ~ 100°C
Mounting Type	Through Hole
Package / Case	8-DIP (0.300", 7.62mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitution of the ACPL-824-060E is determined by strict equivalence across the following critical parameters:

Isolation Voltage: 5000Vrms (mandatory match)
Number of Channels: 2 channels (mandatory match)
Output Type: Transistor output (mandatory match)
Current Transfer Ratio Range: 20% to 300% @ 1mA (mandatory match)
Package Type: 8-DIP (0.300", 7.62mm) (mandatory match for direct substitution)
Operating Temperature Range: -30°C ~ 100°C (mandatory match)
Input Type: AC, DC (mandatory match)

The LTV-824 manufactured by Lite-On Inc. meets all mandatory substitution criteria. Both parts share identical isolation voltage, channel count, output type, current transfer ratio specifications, rise/fall time characteristics, input type compatibility, and package configuration. The parts are functionally interchangeable within the specified electrical and thermal operating parameters.

Parameter Comparison

Parameter	ACPL-824-060E (Broadcom)	LTV-824 (Lite-On)	Match Status
Number of Channels	2	2	Equivalent
Voltage - Isolation	5000Vrms	5000Vrms	Equivalent
Current Transfer Ratio (Min)	20% @ 1mA	20% @ 1mA	Equivalent
Current Transfer Ratio (Max)	300% @ 1mA	300% @ 1mA	Equivalent
Rise / Fall Time (Typ)	4µs, 3µs	4µs, 3µs	Equivalent
Input Type	AC, DC	AC, DC	Equivalent
Output Type	Transistor	Transistor	Equivalent
Current - Output / Channel	50mA	50mA	Equivalent
Voltage - Forward (Vf) (Typ)	1.2V	1.2V	Equivalent
Current - DC Forward (If) (Max)	50mA	50mA	Equivalent
Vce Saturation (Max)	200mV	200mV	Equivalent
Operating Temperature	-30°C ~ 100°C	-30°C ~ 100°C	Equivalent
Voltage - Output (Max)	70V	35V	ACPL-824-060E rated higher
Package / Case	8-DIP (0.300", 7.62mm)	8-DIP (0.300", 7.62mm)	Equivalent
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Equivalent
REACH Status	REACH Unaffected	REACH Unaffected	Equivalent

Engineering Selection Recommendations

Both the ACPL-824-060E and LTV-824 are active production components with full RoHS3 compliance and REACH unaffected status, making them suitable for current and future applications. The ACPL-824-060E provides a maximum output voltage rating of 70V, while the LTV-824 is rated to 35V maximum output voltage. Selection between these parts should be based on the specific output voltage requirements of the application circuit. For applications requiring output voltages above 35V, the ACPL-824-060E is the appropriate choice. For applications operating within 35V output specifications, either part is suitable based on availability and supply chain considerations. Both parts maintain identical isolation performance, switching characteristics, and thermal operating ranges.

Frequently Asked Questions (FAQ)

Q: Can the LTV-824 directly replace the ACPL-824-060E in existing designs?

A: Direct replacement is possible for applications where the output voltage does not exceed 35V. The LTV-824 meets all electrical specifications including isolation voltage, channel count, current transfer ratio, switching speed, and operating temperature range. Pin configuration and package dimensions are identical. If the application requires output voltages between 35V and 70V, the ACPL-824-060E must be retained.

Q: What is the primary difference between these two optoisolators?

A: The maximum output voltage rating differs. The ACPL-824-060E is rated to 70V maximum output voltage, while the LTV-824 is rated to 35V maximum output voltage. All other electrical and mechanical parameters are equivalent.

Q: Are both parts suitable for AC and DC input signals?

A: Yes. Both the ACPL-824-060E and LTV-824 accept AC and DC input types and provide identical current transfer ratio performance across the specified input current range.

Q: Do these parts require different PCB footprints?

A: No. Both parts use the 8-DIP (0.300", 7.62mm) package configuration with identical pin spacing and mounting requirements. PCB footprints are interchangeable.

Q: What compliance certifications apply to both parts?

A: Both the ACPL-824-060E and LTV-824 are RoHS3 compliant and REACH unaffected. Both carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are there differences in switching speed between these parts?

A: No. Both parts exhibit identical rise and fall time specifications of 4µs and 3µs respectively, ensuring equivalent switching performance in isolation applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message