ACPL-3130-060E Equivalent & Substitute Parts

Part Overview

The ACPL-3130-060E is a 1-channel optical isolation gate driver manufactured by Broadcom Limited, rated for 3750Vrms isolation voltage with 2.5A peak output current. This component is designed for high-voltage gate driving applications requiring galvanic isolation between control and power circuits. The part is currently in active production status with 972 units in stock.

Substitute parts are identified when equivalent functional performance can be achieved within the allowed electrical and mechanical parameters of the 8-DIP package category, maintaining compatibility with standard through-hole mounting applications and operating temperature ranges of -40°C to 100°C or higher.

Substiute Parts

ACPL-3130-060E

Broadcom LimitedIn Stock: 1066ACPL-3130-060E Datasheet

Current PartRFQ

FOD3120

onsemiIn Stock: 17311FOD3120 Datasheet

MFR RecommendedRFQ

FOD3120V

onsemiIn Stock: 2175FOD3120V Datasheet

MFR RecommendedRFQ

FOD3180

onsemiIn Stock: 103016FOD3180 Datasheet

MFR RecommendedRFQ

VO3120

Vishay Semiconductor Opto DivisionIn Stock: 1483VO3120 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ACPL-3130-060E are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Package / Case: 8-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole
• Number of Channels: 1
• Technology: Optical Coupling
• Operating Temperature Range: -40°C minimum, 100°C minimum maximum
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Functional Performance Parameters:

• Voltage - Isolation: Equal to or greater than 3750Vrms
• Current - Peak Output: Equal to or greater than 2.5A
• Voltage - Output Supply: Range must accommodate 15V ~ 30V operation
• Current - Output High, Low: Equal to or greater than 2A each

All four substitute parts (FOD3120, FOD3120V, FOD3180, VO3120) meet these mandatory criteria and are therefore electrically and mechanically compatible with applications designed for the ACPL-3130-060E.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are active products with ROHS3 compliance and REACH unaffected status, meeting regulatory requirements equivalent to the ACPL-3130-060E.

FOD3120 and FOD3120V (onsemi): Both parts provide higher isolation voltage (5000Vrms) and peak output current (3A) than the ACPL-3130-060E, with improved propagation delay and pulse width distortion characteristics. FOD3120V carries dual approval (IEC, UL) compared to FOD3120 (UL only). Both maintain the 15V ~ 30V output supply range and -40°C ~ 100°C operating temperature specification.

FOD3180 (onsemi): This part matches the 2.5A peak output current of the ACPL-3130-060E while providing 5000Vrms isolation. It offers superior propagation delay (200ns) and pulse width distortion (65ns) performance. The output supply range is 10V ~ 20V, which is narrower than the ACPL-3130-060E (15V ~ 30V). Approval agencies are cUL and UL.

VO3120 (Vishay Semiconductor Opto Division): This part provides 5300Vrms isolation with 2.5A peak output current matching the ACPL-3130-060E. Output supply range extends to 32V maximum and operating temperature extends to 110°C. Approval agencies are cUR and UL. Moisture sensitivity level is 1 (Unlimited), matching the ACPL-3130-060E.

Frequently Asked Questions (FAQ)

Q: Can FOD3180 be used in place of ACPL-3130-060E if the application operates at 25V output supply?

A: No. FOD3180 is specified for 10V ~ 20V output supply voltage range. The ACPL-3130-060E operates at 15V ~ 30V. A 25V supply exceeds the FOD3180 maximum rating and is not within its allowed operating parameters.

Q: Are all substitute parts pin-compatible with ACPL-3130-060E?

A: All substitute parts use the 8-DIP (0.300", 7.62mm) package with through-hole mounting. Pin compatibility for specific gate driver applications must be verified against individual device datasheets, as pin assignments may differ between manufacturers.

Q: Which substitute part offers the best timing performance?

A: FOD3180 provides the lowest propagation delay (200ns maximum) and pulse width distortion (65ns maximum) among all listed parts. The ACPL-3130-060E specifies 500ns propagation delay and 300ns pulse width distortion.

Q: Is VO3120 suitable for applications requiring operation above 100°C?

A: VO3120 is rated for -40°C ~ 110°C operating temperature, extending 10°C above the ACPL-3130-060E specification of -40°C ~ 100°C. Applications requiring sustained operation above 100°C may use VO3120 within its specified maximum of 110°C.

Q: What is the difference between FOD3120 and FOD3120V?

A: Both parts are electrically identical with 5000Vrms isolation and 3A peak output current. FOD3120V carries additional IEC approval in addition to UL certification, whereas FOD3120 carries UL approval only. Both maintain identical electrical performance specifications.

Q: Can I use a substitute part with higher isolation voltage than required?

A: Yes. Higher isolation voltage ratings provide additional safety margin. All substitute parts (5000Vrms or 5300Vrms) exceed the ACPL-3130-060E minimum requirement of 3750Vrms and are electrically compatible with applications designed for the original part.