ACML-0805-500-T Ferrite Bead Equivalent & Substitute Parts

Part Overview

The ACML-0805-500-T is a ferrite bead manufactured by Abracon LLC, designed for electromagnetic interference (EMI) suppression in surface mount applications. This component provides 50 Ohms of impedance at 100 MHz with a maximum current rating of 1A and is housed in a 0805 (2012 Metric) package. The part is Active in product status and maintains full compliance with RoHS3 and REACH regulations. Substitute parts are identified when equivalent electrical and mechanical parameters are available within the allowed specification range for this ferrite bead category.

Substiute Parts

ACML-0805-500-T

Abracon LLCIn Stock: 1173ACML-0805-500-T Datasheet

Current PartRFQ

ACML-0805-600-T

Abracon LLCIn Stock: 5768ACML-0805-600-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ACML-0805-500-T are identified based on strict equivalence in the following critical parameters:

• Package / Case: 0805 (2012 Metric) — identical physical footprint and mounting compatibility
• Mounting Type: Surface Mount — same assembly process and equipment compatibility
• Current Rating (Max): 1A — equivalent current handling capability
• DC Resistance (DCR) (Max): 50mOhm — identical maximum DC resistance specification
• Operating Temperature Range: -55°C ~ 125°C — identical thermal operating window
• Manufacturer: Abracon LLC — same manufacturer ensures consistent quality and reliability standards
• Series: ACML — same product series maintains design consistency
• RoHS Status: ROHS3 Compliant — equivalent regulatory compliance
• Moisture Sensitivity Level (MSL): 1 (Unlimited) — identical moisture handling classification

The ACML-0805-600-T is classified as a parametric equivalent substitute. While the impedance specification differs (60 Ohms @ 100 MHz versus 50 Ohms @ 100 MHz), all other electrical and mechanical parameters remain identical, allowing substitution in applications where the impedance tolerance range permits this variation.

Parameter Comparison

Engineering Selection Recommendations

Both the ACML-0805-500-T and ACML-0805-600-T maintain Active product status with full RoHS3 compliance and REACH unaffected classification. Selection between these parts depends on circuit impedance requirements at 100 MHz. The main part (ACML-0805-500-T) provides 50 Ohms impedance, while the substitute (ACML-0805-600-T) provides 60 Ohms impedance. Both parts share identical current ratings, DC resistance specifications, operating temperature ranges, and physical dimensions, ensuring mechanical and thermal compatibility in 0805 surface mount applications. Component selection should be based on the specific impedance value required by the circuit design.

Frequently Asked Questions (FAQ)

Q: Can the ACML-0805-600-T be used as a direct replacement for the ACML-0805-500-T?

A: The ACML-0805-600-T is mechanically and thermally compatible with the ACML-0805-500-T due to identical package dimensions, mounting type, current rating, and operating temperature range. However, the impedance difference (60 Ohms versus 50 Ohms at 100 MHz) must be evaluated against circuit design specifications. Substitution is valid only when the circuit design tolerates this impedance variation.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts use the 0805 (2012 Metric) package with identical dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum height of 0.041" (1.05mm). PCB footprints and assembly processes are interchangeable.

Q: Do both parts have the same current handling capability?

A: Yes. Both the ACML-0805-500-T and ACML-0805-600-T have a maximum current rating of 1A and identical DC resistance (DCR) of 50mOhm maximum.

Q: What is the operating temperature range for these ferrite beads?

A: Both parts operate across the identical temperature range of -55°C to 125°C, ensuring thermal compatibility in equivalent applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the ACML-0805-500-T and ACML-0805-600-T are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.