ACML-0402-600-T Ferrite Bead 60 Ohm 0402 Equivalent & Substitute Parts

Part Overview

The ACML-0402-600-T is a ferrite bead component manufactured by Abracon LLC, designed for electromagnetic interference (EMI) suppression in 0402 (1005 Metric) surface mount applications. This component provides 60 Ohms of impedance at 100 MHz with a maximum current rating of 200mA and DC resistance of 300mOhm. The part is currently in active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are necessary when the primary part experiences supply constraints, obsolescence, or when design requirements allow for alternative manufacturers with compatible electrical and mechanical specifications.

Substiute Parts

ACML-0402-600-T

Abracon LLCIn Stock: 1763ACML-0402-600-T Datasheet

Current PartRFQ

742792716

Würth ElektronikIn Stock: 20716742792716 Datasheet

Parametric EquivalentRFQ

7427927160

Würth ElektronikIn Stock: 393737427927160 Datasheet

Parametric EquivalentRFQ

FB100505T-560Y-S

Cal-Chip Electronics, Inc.In Stock: 30767FB100505T-560Y-S Datasheet

Parametric EquivalentRFQ

GZ1005D600TF

Shenzhen Sunlord Electronics Co., Ltd.In Stock: 35427GZ1005D600TF Datasheet

Parametric EquivalentRFQ

ILBB0402ER600V

Vishay DaleIn Stock: 5512ILBB0402ER600V Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ACML-0402-600-T is determined by the following critical parameters:

Primary Substitution Criteria:

• Impedance @ 100 MHz: 60 Ohms (exact match required)
• Package / Case: 0402 (1005 Metric) (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Surface Mount (exact match required)

Secondary Compatibility Parameters:

• Current Rating (Max): 200mA minimum (equal or higher acceptable)
• DC Resistance (DCR) (Max): 300mOhm maximum (equal or lower acceptable)
• RoHS Status: ROHS3 Compliant (compliance required)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (equal or better acceptable)

Parts meeting all primary criteria and secondary compatibility parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Exact Electrical Match):

7427927160 (Würth Elektronik) and GZ1005D600TF (Shenzhen Sunlord Electronics) are direct parametric equivalents with identical impedance (60 Ohms @ 100 MHz), operating temperature range, and package specifications. Both parts are in active product status. The 7427927160 offers enhanced current rating (400mA vs. 200mA) with equivalent DCR, providing additional design margin. GZ1005D600TF maintains identical electrical specifications to the primary part.

ILBB0402ER600V (Vishay Dale) meets all primary substitution criteria with active product status and provides higher current rating (300mA) with equivalent DCR performance.

Conditional Substitutes:

742792716 (Würth Elektronik) meets all electrical and mechanical criteria but carries obsolete product status. This part should be selected only when supply of active alternatives is unavailable and design validation confirms compatibility with the lower DCR specification (250mOhm vs. 300mOhm maximum).

FB100505T-560Y-S (Cal-Chip Electronics) presents a near-equivalent option with 56 Ohms impedance at 100 MHz, representing a 6.7% deviation from the specified 60 Ohms. This part is suitable only for applications where impedance tolerance permits this variation.

Compliance Verification:

All recommended substitutes maintain ROHS3 compliance and MSL 1 (Unlimited) ratings, ensuring regulatory and environmental compatibility with the primary part specification.

Frequently Asked Questions (FAQ)

Q: Can FB100505T-560Y-S be used as a direct replacement for ACML-0402-600-T?

A: FB100505T-560Y-S is not a direct replacement. The impedance specification is 56 Ohms @ 100 MHz versus the required 60 Ohms @ 100 MHz, representing a 6.7% deviation. This part is suitable only for applications where the design permits impedance tolerance within this range.

Q: What is the difference between 742792716 and 7427927160?

A: Both are Würth Elektronik ferrite beads in the 0402 package with 60 Ohms impedance. The primary differences are: 742792716 is obsolete product status with 300mA current rating and 250mOhm DCR; 7427927160 is active product status with 400mA current rating and 300mOhm DCR. The 7427927160 is the preferred selection for new designs.

Q: Are all substitute parts available in Tape & Reel packaging?

A: No. The 742792716 is supplied in Cut Tape (CT) packaging, while ACML-0402-600-T, 7427927160, FB100505T-560Y-S, GZ1005D600TF, and ILBB0402ER600V are all available in Tape & Reel (TR) packaging. Packaging format should be verified against assembly equipment requirements.

Q: Which substitute offers the best current rating margin?

A: The 7427927160 (Würth Elektronik) provides the highest current rating at 400mA, compared to the primary part specification of 200mA. This represents a 2x current capacity margin and is suitable for applications requiring enhanced thermal performance or current headroom.

Q: Do all substitutes maintain the same operating temperature range?

A: Yes. All listed substitute parts maintain the -55°C ~ 125°C operating temperature range specified for the ACML-0402-600-T.

Q: What is the significance of DCR (DC Resistance) differences between parts?

A: DCR affects power dissipation and insertion loss at DC and low frequencies. The ACML-0402-600-T specifies 300mOhm maximum DCR. The 742792716 offers lower DCR at 250mOhm, reducing power loss. The 7427927160 and ILBB0402ER600V maintain the 300mOhm specification. Lower DCR is beneficial in high-current applications but does not disqualify higher DCR parts from substitution if the application permits.