ACML-0201-241-T Ferrite Bead Equivalent & Substitute Parts

Part Overview

The ACML-0201-241-T is a ferrite bead manufactured by Abracon LLC, designed for electromagnetic interference (EMI) suppression in compact surface mount applications. This component operates at 240 Ohms impedance at 100 MHz with a maximum current rating of 200mA and is housed in a 0201 (0603 Metric) package. The part is Active status and ROHS3 compliant, making it suitable for modern electronics requiring environmental compliance. Equivalent substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit designs.

Substiute Parts

ACML-0201-241-T

Abracon LLCIn Stock: 1249ACML-0201-241-T Datasheet

Current PartRFQ

GZ0603D241TF

Shenzhen Sunlord Electronics Co., Ltd.In Stock: 6036GZ0603D241TF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of ferrite beads is determined by strict equivalence across electrical and mechanical parameters. The ACML-0201-241-T can be substituted with parts meeting all of the following criteria:

• Impedance specification: 240 Ohms @ 100 MHz
• Current rating: 200mA maximum
• DC resistance: 1 Ohm maximum
• Package type: 0201 (0603 Metric)
• Physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm)
• Height: 0.014" (0.35mm) maximum
• Operating temperature range: -55°C ~ 125°C
• Surface mount mounting type
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The GZ0603D241TF from Shenzhen Sunlord Electronics Co., Ltd. meets all specified parameters and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the ACML-0201-241-T and GZ0603D241TF are Active status components with identical electrical and mechanical specifications. Selection between these parts can be based on availability, lead time, and supply chain requirements. Both components are ROHS3 compliant and carry MSL rating 1, indicating no moisture sensitivity constraints during storage and handling. The GZ0603D241TF currently has higher inventory availability (6005 Pcs) compared to the ACML-0201-241-T (1197 Pcs), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can the GZ0603D241TF be used as a direct replacement for the ACML-0201-241-T?

A: Yes. Both parts are parametric equivalents with identical impedance, current rating, DC resistance, package dimensions, operating temperature range, and compliance certifications. Direct substitution is supported without circuit modification.

Q: Are there any differences in the filter type designation between these parts?

A: The GZ0603D241TF is designated as a Signal Line ferrite bead, while the ACML-0201-241-T does not specify a filter type. This designation does not affect electrical equivalence or substitution compatibility.

Q: What is the significance of the 0201 (0603 Metric) package designation?

A: The 0201 package is the imperial designation, while 0603 Metric is the metric equivalent. Both refer to the same physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm). These designations are interchangeable in component specifications.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both the ACML-0201-241-T and GZ0603D241TF operate across the temperature range of -55°C to 125°C, supporting applications requiring extended thermal performance.

Q: What does MSL rating 1 (Unlimited) mean for storage and handling?

A: MSL 1 indicates that the component has no moisture sensitivity limitations. These parts can be stored and handled without special moisture control measures or floor life restrictions.