AC2010FK-07715RL Equivalent & Substitute Parts

Part Overview

The AC2010FK-07715RL is a 715 Ohms ±1% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by YAGEO. This thick film resistor is designed for automotive applications with AEC-Q200 qualification and moisture-resistant construction. The part is currently in active production status. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or design flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

AC2010FK-07715RL

YAGEOIn Stock: 1039AC2010FK-07715RL Datasheet

Current PartRFQ

CRCW2010715RFKEF

Vishay DaleIn Stock: 9082CRCW2010715RFKEF Datasheet

UpgradeRFQ

ERJ-12SF7150U

Panasonic Electronic ComponentsIn Stock: 5102ERJ-12SF7150U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AC2010FK-07715RL are qualified based on the following criteria:

• Identical resistance value: 715 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.75W
• Identical package: 2010 (5025 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical automotive qualification: AEC-Q200
• Identical moisture sensitivity level: MSL 1
• Identical RoHS compliance: ROHS3 Compliant
• Identical packaging format: Tape & Reel (TR)

All substitute parts meet these electrical and mechanical requirements and are suitable for direct replacement in applications originally designed for the AC2010FK-07715RL.

Parameter Comparison

Engineering Selection Recommendations

CRCW2010715RFKEF (Vishay Dale) is the primary substitute for new designs and ongoing production. This part maintains active product status and meets all electrical, mechanical, and compliance requirements identical to the AC2010FK-07715RL. The maximum seated height of 0.028" (0.70mm) is within acceptable tolerance for 2010 package applications.

ERJ-12SF7150U (Panasonic) is available as an alternative substitute but carries a "Not For New Designs" product status. This part is suitable for legacy system support, repair, or replacement applications where existing inventory or design documentation references this component. The electrical and mechanical specifications remain equivalent to the main part.

Selection between YAGEO AC2010FK-07715RL and Vishay Dale CRCW2010715RFKEF should be based on supply chain availability, lead time requirements, and cost considerations, as both parts are in active production with identical specifications and AEC-Q200 automotive qualification.

Frequently Asked Questions (FAQ)

Q: Can CRCW2010715RFKEF be used as a direct replacement for AC2010FK-07715RL?

A: Yes. Both parts are 715 Ohms ±1%, 0.75W, 2010 package thick film resistors with AEC-Q200 qualification, ±100ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. The 0.002" (0.05mm) difference in maximum seated height is within standard PCB design tolerances for 2010 package applications.

Q: Why is ERJ-12SF7150U marked "Not For New Designs"?

A: The "Not For New Designs" status indicates that Panasonic has discontinued active development for this product line. While the part remains electrically and mechanically equivalent, it is recommended for legacy applications only. For new designs, CRCW2010715RFKEF or AC2010FK-07715RL are preferred.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. AC2010FK-07715RL, CRCW2010715RFKEF, and ERJ-12SF7150U are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the significance of the 2010 (5025 Metric) package designation?

A: The 2010 package is a surface-mount chip resistor with dimensions of 0.197" L x 0.098" W (5.00mm x 2.50mm). All substitute parts use this identical package, ensuring compatibility with existing PCB layouts and pick-and-place equipment programming.

Q: Can these parts be used interchangeably in automotive applications?

A: Yes. All three parts carry AEC-Q200 automotive qualification, which certifies reliability and performance in automotive environments. They are suitable for direct substitution in automotive circuit designs.