AC0805FR-07324RL Equivalent & Substitute Parts

Part Overview

The AC0805FR-07324RL is a 324 Ohm ±1% thick film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is manufactured by YAGEO and carries Automotive AEC-Q200 certification with moisture-resistant construction. The part is currently Active in product status with 3143 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or supply chain continuity while maintaining identical electrical and mechanical specifications.

Substiute Parts

AC0805FR-07324RL

YAGEOIn Stock: 3251AC0805FR-07324RL Datasheet

Current PartRFQ

RC0805FR-07324RL

YAGEOIn Stock: 191644RC0805FR-07324RL Datasheet

MFR RecommendedRFQ

CRCW0805324RFKEA

Vishay DaleIn Stock: 33176CRCW0805324RFKEA Datasheet

MFR RecommendedRFQ

ERJ-6ENF3240V

Panasonic Electronic ComponentsIn Stock: 42587ERJ-6ENF3240V Datasheet

MFR RecommendedRFQ

KTR10EZPF3240

Rohm SemiconductorIn Stock: 11430KTR10EZPF3240 Datasheet

MFR RecommendedRFQ

MCR10ERTF3240

Rohm SemiconductorIn Stock: 2679MCR10ERTF3240 Datasheet

MFR RecommendedRFQ

RMCF0805FT324R

Stackpole Electronics IncIn Stock: 6102RMCF0805FT324R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AC0805FR-07324RL are qualified based on the following criteria:

• Electrical Parameters: Resistance value (324 Ohms), tolerance (±1%), power rating (0.125W), and temperature coefficient (±100ppm/°C) must be identical
• Package Specifications: 0805 (2012 Metric) form factor with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm)
• Environmental Ratings: Operating temperature range (-55°C ~ 155°C), MSL Level 1, and RoHS3 compliance
• Regulatory Compliance: REACH Unaffected and EAR99 classification status

All identified substitutes meet these core parameters. Variations in height (seated maximum) and specific feature sets (such as AEC-Q200 automotive qualification or high voltage capability) are noted but do not disqualify substitution eligibility for general applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, Full Compliance)

RC0805FR-07324RL (YAGEO) is the manufacturer-recommended primary substitute with highest inventory availability (191,628 units). This part maintains identical electrical specifications and 0805 package geometry. While lacking explicit AEC-Q200 automotive certification, it meets all core electrical and environmental parameters.

CRCW0805324RFKEA (Vishay Dale) and ERJ-6ENF3240V (Panasonic Electronic Components) are qualified substitutes with AEC-Q200 automotive certification matching the original part's automotive-grade specification. Both are Active products with substantial inventory levels (33,075 and 42,540 units respectively).

RMCF0805FT324R (Stackpole Electronics Inc) is an Active substitute with AEC-Q200 certification and adequate inventory (6,054 units).

KTR10EZPF3240 (Rohm Semiconductor) is an Active substitute with AEC-Q200 certification and high voltage capability. Inventory is 11,411 units.

Secondary Substitute (Discontinued Status)

MCR10ERTF3240 (Rohm Semiconductor) is discontinued at DiGi Electronics but remains available with 2,581 units in stock. This part meets all electrical and mechanical specifications but should be considered only when primary substitutes are unavailable, as future sourcing may be limited.

Height Considerations

All substitutes maintain 0805 package footprint compatibility. Height variations (0.50mm to 0.70mm seated maximum) are within typical PCB assembly tolerances and do not affect electrical performance or standard reflow soldering processes.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC0805FR-07324RL for AC0805FR-07324RL in automotive applications?

A: RC0805FR-07324RL meets all electrical and mechanical specifications. However, it lacks explicit AEC-Q200 automotive certification. For applications requiring automotive-grade components, use CRCW0805324RFKEA, ERJ-6ENF3240V, RMCF0805FT324R, or KTR10EZPF3240 instead.

Q: Are all substitute parts pin-compatible with the original AC0805FR-07324RL?

A: Yes. All substitutes use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two terminations. PCB layout compatibility is guaranteed.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: AC0805FR-07324RL is supplied in Tape & Reel (TR) format for automated assembly. MCR10ERTF3240 is supplied in Cut Tape (CT) & Digi-Reel format. Both are suitable for pick-and-place equipment; verify your assembly equipment compatibility with the specific packaging format.

Q: Why is MCR10ERTF3240 marked as discontinued?

A: MCR10ERTF3240 is discontinued at DiGi Electronics but remains available from inventory. Avoid specifying this part for new designs requiring long-term supply assurance. Use Active-status alternatives for production designs.

Q: Do all substitutes meet RoHS3 and REACH compliance?

A: Yes. All listed substitutes are ROHS3 Compliant and REACH Unaffected, matching the original part's regulatory status.

Q: Can I mix different substitute manufacturers in the same production batch?

A: All substitutes meet identical electrical specifications (324 Ω ±1%, 0.125W, ±100ppm/°C) and package geometry. Mixing manufacturers is electrically compatible. However, verify your quality assurance and traceability requirements before combining multiple manufacturers in a single assembly lot.