AC0201JR-0782KL Equivalent & Substitute Parts

Part Overview

The AC0201JR-0782KL is an 82 kOhms ±5% thick film chip resistor manufactured by YAGEO in 0201 package format with 0.05W power rating. This component is rated for automotive applications under AEC-Q200 standard with operating temperature range of -55°C to 155°C. The part is currently active in production with 1085 units in stock. Equivalent and substitute parts are necessary to address supply chain flexibility, design optimization for tolerance requirements, and manufacturer availability across different procurement channels.

Substiute Parts

AC0201JR-0782KL

YAGEOIn Stock: 1097AC0201JR-0782KL Datasheet

Current PartRFQ

CRCW020182K0JNED

Vishay DaleIn Stock: 4076CRCW020182K0JNED Datasheet

DirectRFQ

RK73B1HTTC823J

KOA Speer Electronics, Inc.In Stock: 5619RK73B1HTTC823J Datasheet

DirectRFQ

RMCF0201JT82K0

Stackpole Electronics IncIn Stock: 6741RMCF0201JT82K0 Datasheet

DirectRFQ

ERJ-1GNJ823C

Panasonic Electronic ComponentsIn Stock: 57095ERJ-1GNJ823C Datasheet

UpgradeRFQ

CRCW020182K0FNED

Vishay DaleIn Stock: 5581CRCW020182K0FNED Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria applied strictly to the provided parameters:

Primary Substitution Criteria (All Required):

• Resistance value: 82 kOhms
• Package format: 0201 (0603 Metric)
• Power rating: 0.05W (1/20W)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Status: ROHS3 Compliant

Secondary Substitution Criteria (Application-Dependent):

• Tolerance: ±5% (direct equivalent) or ±1% (upgraded tolerance)
• Operating temperature range: -55°C to 155°C (preferred) or -55°C to 125°C (limited range)
• Automotive rating: AEC-Q200 (preferred for automotive applications)
• Product status: Active (preferred) or Not For New Designs (legacy support)

Substitute parts are grouped into three categories based on these parameters:

Direct Equivalents maintain all primary and secondary criteria matching the main part specification.

Upgraded Tolerance Parts provide tighter tolerance (±1%) while maintaining all other parameters, suitable for applications requiring improved accuracy.

Alternative Manufacturers provide functionally equivalent parts from different suppliers with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

For Automotive AEC-Q200 Applications: RMCF0201JT82K0 (Stackpole Electronics) is the preferred direct substitute. It maintains AEC-Q200 compliance, active product status, and identical electrical specifications to the main part. This part provides the highest inventory availability at 6662 units.

For General Industrial Applications: CRCW020182K0JNED (Vishay Dale) provides direct electrical and mechanical equivalence with active status and substantial inventory (4002 units). This part is suitable where AEC-Q200 certification is not required.

For Improved Tolerance Requirements: CRCW020182K0FNED (Vishay Dale) offers ±1% tolerance while maintaining all other specifications including full temperature range (-55°C to 155°C) and active product status. This part is appropriate for applications requiring tighter resistance accuracy.

For Maximum Availability: ERJ-1GNJ823C (Panasonic Electronic Components) provides the largest inventory stock at 57077 units. Note that this part has a reduced operating temperature upper limit of 125°C versus 155°C for the main part, and does not carry AEC-Q200 rating.

Legacy Support: RK73B1HTTC823J (KOA Speer Electronics) maintains AEC-Q200 compliance and full temperature range but carries "Not For New Designs" status. This part should be used only for replacement or maintenance of existing designs.

Frequently Asked Questions (FAQ)

Q: Can ERJ-1GNJ823C be used as a direct replacement for AC0201JR-0782KL in automotive applications?

A: ERJ-1GNJ823C is not recommended for automotive applications requiring AEC-Q200 compliance. While it matches all electrical parameters and tolerance, it lacks AEC-Q200 certification and has a reduced maximum operating temperature of 125°C compared to 155°C for the main part.

Q: What is the difference between CRCW020182K0JNED and CRCW020182K0FNED?

A: Both parts are manufactured by Vishay Dale in 0201 package with identical electrical specifications except for tolerance. CRCW020182K0JNED provides ±5% tolerance matching the main part, while CRCW020182K0FNED provides tighter ±1% tolerance. Both support the full operating temperature range of -55°C to 155°C.

Q: Is RK73B1HTTC823J suitable for new product designs?

A: RK73B1HTTC823J carries "Not For New Designs" status and should not be selected for new product development. It is appropriate only for replacement or maintenance of existing designs already using this part number.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All substitute parts listed maintain ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited), matching the environmental and regulatory requirements of the main part.

Q: Which substitute part offers the best supply chain flexibility?

A: ERJ-1GNJ823C from Panasonic provides the highest inventory availability at 57077 units. For applications where AEC-Q200 compliance is required, RMCF0201JT82K0 from Stackpole Electronics offers the best combination of compliance, active status, and substantial inventory at 6662 units.

Q: Can I use a ±1% tolerance part in place of a ±5% tolerance specification?

A: Yes. CRCW020182K0FNED with ±1% tolerance is a valid substitute for applications originally specified with ±5% tolerance. Tighter tolerance provides improved accuracy and is backward compatible with ±5% specifications.