Request Quote
(Ships tomorrow)
AC0201JR-0768RL Equivalent & Substitute Parts
Part Overview
The AC0201JR-0768RL is a 68 Ohm ±5% thick film chip resistor in 0201 package (0603 metric) rated for 0.05W (1/20W) power dissipation. Manufactured by YAGEO under the AC series, this component is AEC-Q200 automotive qualified with moisture resistance and operates across -55°C to 155°C. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific tolerance or feature requirements.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Resistance | 68 Ohms |
| Tolerance | ±5% |
| Power Rating | 0.05W (1/20W) |
| Package / Case | 0201 (0603 Metric) |
| Composition | Thick Film |
| Temperature Coefficient | ±200ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| Size / Dimension | 0.024" L x 0.012" W (0.60mm x 0.30mm) |
| Height - Seated (Max) | 0.010" (0.26mm) |
| Number of Terminations | 2 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| REACH Status | REACH Unaffected |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict alignment of electrical and mechanical parameters. All substitute parts listed maintain the same 68 Ohm resistance value, 0201 package footprint, 0.05W power rating, thick film composition, and operating temperature range of -55°C to 155°C. Tolerance variations (±5% vs ±1%) and manufacturer-specific certifications (AEC-Q200 automotive qualification) are noted as differentiators but do not prevent functional substitution when application requirements permit.
The substitute parts are grouped as follows:
Tolerance-Upgraded Substitutes (±1%): AC0201FR-0768RL (YAGEO) and CRCW020168R0FNED (Vishay Dale) provide tighter tolerance specifications while maintaining all other electrical and mechanical parameters.
Direct Equivalents (±5%): CRCW020168R0JNED (Vishay Dale), RMCF0201JT68R0 (Stackpole Electronics Inc), and ERJ-1GNJ680C (Panasonic Electronic Components) match the ±5% tolerance and core specifications of the main part.
All substitute parts are active in production, ROHS3 compliant, and MSL 1 rated. Dimensional compatibility is confirmed across all listed parts.
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Resistance | Tolerance | Power (Watts) | Package / Case | Composition | Temperature Coefficient | Operating Temperature | Size / Dimension | Height - Seated (Max) | RoHS Status | MSL | Product Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AC0201JR-0768RL | YAGEO | 68 Ohms | ±5% | 0.05W | 0201 (0603 Metric) | Thick Film | ±200ppm/°C | -55°C ~ 155°C | 0.024" L x 0.012" W (0.60mm x 0.30mm) | 0.010" (0.26mm) | ROHS3 Compliant | 1 (Unlimited) | Active |
| AC0201FR-0768RL | YAGEO | 68 Ohms | ±1% | 0.05W | 0201 (0603 Metric) | Thick Film | ±200ppm/°C | -55°C ~ 155°C | 0.024" L x 0.012" W (0.60mm x 0.30mm) | 0.010" (0.26mm) | ROHS3 Compliant | 1 (Unlimited) | Active |
| CRCW020168R0JNED | Vishay Dale | 68 Ohms | ±5% | 0.05W | 0201 (0603 Metric) | Thick Film | ±200ppm/°C | -55°C ~ 155°C | 0.024" L x 0.012" W (0.60mm x 0.30mm) | 0.010" (0.26mm) | ROHS3 Compliant | 1 (Unlimited) | Active |
| RMCF0201JT68R0 | Stackpole Electronics Inc | 68 Ohms | ±5% | 0.05W | 0201 (0603 Metric) | Thick Film | ±200ppm/°C | -55°C ~ 155°C | 0.024" L x 0.012" W (0.60mm x 0.30mm) | 0.011" (0.28mm) | ROHS3 Compliant | 1 (Unlimited) | Active |
| ERJ-1GNJ680C | Panasonic Electronic Components | 68 Ohms | ±5% | 0.05W | 0201 (0603 Metric) | Thick Film | ±200ppm/°C | -55°C ~ 125°C | 0.024" L x 0.012" W (0.60mm x 0.30mm) | 0.010" (0.26mm) | ROHS3 Compliant | 1 (Unlimited) | Active |
| CRCW020168R0FNED | Vishay Dale | 68 Ohms | ±1% | 0.05W | 0201 (0603 Metric) | Thick Film | ±200ppm/°C | -55°C ~ 155°C | 0.024" L x 0.012" W (0.60mm x 0.30mm) | 0.010" (0.26mm) | ROHS3 Compliant | 1 (Unlimited) | Active |
Engineering Selection Recommendations
All listed substitute parts are active in production and ROHS3 compliant. Selection between direct equivalents (±5% tolerance) and tolerance-upgraded variants (±1%) depends on circuit design requirements for resistance accuracy.
For applications requiring AEC-Q200 automotive qualification, AC0201JR-0768RL (main part) and RMCF0201JT68R0 (Stackpole) both carry this certification. YAGEO AC0201JR-0768RL and AC0201FR-0768RL additionally specify moisture resistance as a feature.
The ERJ-1GNJ680C (Panasonic) operates to a maximum temperature of 125°C, which is 30°C lower than the main part and other substitutes rated to 155°C. This part is suitable only for applications where the upper operating temperature does not exceed 125°C.
All parts maintain identical package footprint (0201), power rating (0.05W), and MSL 1 rating. Height variation between RMCF0201JT68R0 (0.011" max) and other parts (0.010" max) is within typical PCB assembly tolerances.
Frequently Asked Questions (FAQ)
Q: Can I substitute AC0201JR-0768RL with a ±1% tolerance part?
A: Yes. AC0201FR-0768RL (YAGEO) and CRCW020168R0FNED (Vishay Dale) are ±1% tolerance variants that maintain all other electrical and mechanical specifications. Tighter tolerance improves circuit accuracy where required.
Q: Are all substitute parts automotive qualified?
A: AC0201JR-0768RL (main part) and RMCF0201JT68R0 carry AEC-Q200 certification. Other substitutes do not list automotive qualification. Verify AEC-Q200 requirement for your application before selecting alternatives.
Q: What is the maximum operating temperature for each part?
A: AC0201JR-0768RL, AC0201FR-0768RL, CRCW020168R0JNED, RMCF0201JT68R0, and CRCW020168R0FNED operate to 155°C. ERJ-1GNJ680C operates to 125°C maximum. Select accordingly for high-temperature applications.
Q: Are all parts available in Tape & Reel packaging?
A: Yes. All listed parts are supplied in Tape & Reel (TR) packaging suitable for automated assembly.
Q: What is the height difference between RMCF0201JT68R0 and other parts?
A: RMCF0201JT68R0 has a maximum seated height of 0.011" (0.28mm), while other parts are specified at 0.010" (0.26mm). This 0.001" difference is within standard PCB assembly tolerances and does not affect functional compatibility.
Q: Do all parts have the same moisture sensitivity level?
A: Yes. All listed parts are MSL 1 rated with unlimited shelf life under standard storage conditions.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts





