AC0201FR-07487RL Equivalent & Substitute Parts

Part Overview

The AC0201FR-07487RL is a 487 Ohm ±1% thick film chip resistor in 0201 package (0.60mm × 0.30mm) rated at 0.05W (1/20W). Manufactured by YAGEO under the AC series, this component is qualified to AEC-Q200 automotive standards with moisture-resistant construction. The part is active in production with 1106 units in current inventory. Substitute parts are identified to support supply chain continuity, design flexibility across manufacturers, and inventory optimization while maintaining electrical and mechanical compatibility.

Substiute Parts

AC0201FR-07487RL

YAGEOIn Stock: 1193AC0201FR-07487RL Datasheet

Current PartRFQ

RC0201FR-07487RL

YAGEOIn Stock: 10774RC0201FR-07487RL Datasheet

UpgradeRFQ

CRCW0201487RFNED

Vishay DaleIn Stock: 6504CRCW0201487RFNED Datasheet

DirectRFQ

RMCF0201FT487R

Stackpole Electronics IncIn Stock: 18214RMCF0201FT487R Datasheet

DirectRFQ

ERJ-1GNF4870C

Panasonic Electronic ComponentsIn Stock: 250924ERJ-1GNF4870C Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 487 Ohms
• Tolerance: ±1%
• Power rating: 0.05W (1/20W)
• Package: 0201 (0603 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• RoHS compliance: ROHS3
• Moisture sensitivity: MSL 1

All identified substitute parts meet these core electrical and mechanical requirements. Operating temperature range varies between -55°C to 125°C and -55°C to 155°C; selection depends on application requirements. AEC-Q200 automotive qualification is present on the main part (AC0201FR-07487RL) and one substitute (RMCF0201FT487R); other substitutes lack this specific rating designation.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain electrical equivalence to the AC0201FR-07487RL across resistance, tolerance, power rating, and thermal characteristics. Selection criteria are based on application-specific requirements:

For AEC-Q200 automotive applications: RMCF0201FT487R (Stackpole) provides AEC-Q200 qualification matching the original part. AC0201FR-07487RL remains the primary choice with higher temperature rating (-55°C to 155°C).

For extended temperature operation (-55°C to 155°C): AC0201FR-07487RL, CRCW0201487RFNED, and RMCF0201FT487R support the full temperature range. RC0201FR-07487RL and ERJ-1GNF4870C are limited to -55°C to 125°C.

For supply availability: ERJ-1GNF4870C (Panasonic) offers the highest inventory level (250900 units), followed by RMCF0201FT487R (18139 units) and RC0201FR-07487RL (10759 units).

For height-constrained designs: All parts except RMCF0201FT487R have maximum seated height of 0.010" (0.26mm). RMCF0201FT487R measures 0.011" (0.28mm) maximum.

All parts are ROHS3 compliant, MSL 1 rated, and carry REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can ERJ-1GNF4870C replace AC0201FR-07487RL in automotive applications? A: ERJ-1GNF4870C is electrically equivalent but lacks AEC-Q200 qualification. Use only if automotive qualification is not a design requirement. Operating temperature is limited to -55°C to 125°C versus -55°C to 155°C for the original part.

Q: What is the difference between AC0201FR-07487RL and RC0201FR-07487RL? A: Both are YAGEO 487Ω ±1% 0201 resistors. AC0201FR-07487RL includes AEC-Q200 automotive qualification and supports -55°C to 155°C operation. RC0201FR-07487RL lacks automotive qualification and operates to -55°C to 125°C. RC0201FR-07487RL has higher inventory availability.

Q: Are all substitute parts physically interchangeable? A: Yes, all parts use 0201 (0603 Metric) package with identical length and width (0.024" × 0.012"). Maximum seated height is 0.010" for most parts; RMCF0201FT487R measures 0.011" maximum. Verify height clearance in space-constrained PCB layouts.

Q: Which substitute offers the best supply chain position? A: ERJ-1GNF4870C (Panasonic) has the largest inventory at 250900 units. RMCF0201FT487R (Stackpole) provides the second-highest availability at 18139 units while maintaining AEC-Q200 qualification.

Q: Do all parts meet moisture and RoHS requirements? A: All identified substitutes are ROHS3 compliant and rated MSL 1 (Unlimited moisture sensitivity level). All carry REACH unaffected status.

Q: What is the temperature coefficient significance? A: All parts share ±200ppm/°C temperature coefficient, ensuring consistent resistance drift across the operating temperature range. This parameter is identical across all substitutes.