AC0201FR-07205RL Equivalent & Substitute Parts

Part Overview

The AC0201FR-07205RL is a 205 Ohms ±1% thick film chip resistor in 0201 package (0.60mm x 0.30mm) rated at 0.05W (1/20W) power dissipation. This component is manufactured by YAGEO and carries Automotive AEC-Q200 certification with moisture resistance. The part is active in production with 745 units currently in stock. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance ratings remain equivalent across manufacturers.

Substiute Parts

AC0201FR-07205RL

YAGEOIn Stock: 789AC0201FR-07205RL Datasheet

Current PartRFQ

RC0201FR-07205RL

YAGEOIn Stock: 9728RC0201FR-07205RL Datasheet

UpgradeRFQ

RMCF0201FT205R

Stackpole Electronics IncIn Stock: 26917RMCF0201FT205R Datasheet

DirectRFQ

ERJ-1GNF2050C

Panasonic Electronic ComponentsIn Stock: 35723ERJ-1GNF2050C Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AC0201FR-07205RL is determined by the following criteria:

• Resistance value: 205 Ohms
• Tolerance: ±1%
• Power rating: 0.05W (1/20W)
• Package: 0201 (0603 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Moisture sensitivity level: MSL 1
• RoHS and REACH compliance status

All identified substitute parts meet these core electrical and mechanical parameters. Variations in operating temperature range and specific certifications (such as AEC-Q200) are noted in the comparison table below.

Parameter Comparison

Engineering Selection Recommendations

All four parts are active products with ROHS3 compliance and REACH unaffected status, making them suitable for new designs and production environments.

For applications requiring Automotive AEC-Q200 certification, AC0201FR-07205RL and RMCF0201FT205R are qualified options. The AC0201FR-07205RL additionally specifies moisture resistance as an explicit feature.

For applications with maximum operating temperature requirements at 155°C, AC0201FR-07205RL and RMCF0201FT205R support this range. RC0201FR-07205RL and ERJ-1GNF2050C are limited to 125°C maximum operating temperature.

RC0201FR-07205RL offers the highest inventory availability among YAGEO products (9,701 units). RMCF0201FT205R (Stackpole) and ERJ-1GNF2050C (Panasonic) provide significantly larger stock quantities at 26,862 and 35,615 units respectively, supporting high-volume procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can RC0201FR-07205RL replace AC0201FR-07205RL in all applications?

A: RC0201FR-07205RL matches all core electrical parameters (205 Ohms ±1%, 0.05W, ±200ppm/°C). However, it operates to 125°C maximum versus 155°C for the AC0201FR-07205RL. Applications requiring the full 155°C operating range must use AC0201FR-07205RL or RMCF0201FT205R. RC0201FR-07205RL lacks explicit AEC-Q200 automotive certification.

Q: What is the difference between YAGEO AC and RC series in 0201 package?

A: Both AC0201FR-07205RL and RC0201FR-07205RL are 0201 thick film resistors with identical resistance, tolerance, and power ratings. The AC series specifies Automotive AEC-Q200 certification and moisture resistance. The RC series specifies moisture resistance but does not list AEC-Q200 certification. Operating temperature range differs: AC supports -55°C to 155°C, RC supports -55°C to 125°C.

Q: Is RMCF0201FT205R from Stackpole compatible with the AC0201FR-07205RL footprint?

A: Yes. Both parts use the 0201 package (0.60mm x 0.30mm). Physical dimensions are equivalent: 0.024" L x 0.012" W. Height specifications are comparable (0.010" for AC0201FR-07205RL, 0.011" for RMCF0201FT205R). PCB footprints are interchangeable.

Q: Does ERJ-1GNF2050C from Panasonic meet automotive requirements?

A: ERJ-1GNF2050C does not list AEC-Q200 certification. It is suitable for commercial and industrial applications. For automotive applications requiring AEC-Q200 qualification, use AC0201FR-07205RL or RMCF0201FT205R.

Q: What is the moisture sensitivity level (MSL) for these parts?

A: All four parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints during storage or handling. Standard PCB assembly processes are applicable without special moisture control measures.