ABS10TM Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The ABS10TM is a low-power bridge rectifier manufactured by Diodes Incorporated, designed for single-phase rectification applications. This surface-mount component operates at 1 kV peak reverse voltage with 1 A average rectified current capacity. The part is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance are maintained across alternative manufacturer part numbers or packaging variants within the same product family.

Substiute Parts

ABS10TM

Diodes IncorporatedIn Stock: 1131ABS10TM Datasheet

Current PartRFQ

ABS10M-13

Diodes IncorporatedIn Stock: 4133ABS10M-13 Datasheet

Parametric EquivalentRFQ

HDS10M-13

Diodes IncorporatedIn Stock: 6269HDS10M-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ABS10TM is determined by strict equivalence across the following parameters:

Mandatory Matching Parameters:

• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 500 mA
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Surface Mount
• Package / Case: 4-SMD, Gull Wing
• RoHS Status: ROHS3 Compliant
• Product Status: Active

Allowable Variations:

• Supplier Device Package designation (4-SOPA Type WX vs. HDS)
• Current - Reverse Leakage @ Vr (5 µA or 10 µA @ 1000 V)
• Moisture Sensitivity Level (MSL) rating

The ABS10TM, ABS10M-13, and HDS10M-13 all meet these criteria and are classified as parametric equivalents within the Diodes Incorporated bridge rectifier product family.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ABS10TM, ABS10M-13, and HDS10M-13—are Active product status components manufactured by Diodes Incorporated and maintain full ROHS3 compliance. Selection between these equivalents is based on availability and packaging variant requirements:

ABS10TM is the primary reference part with 1,098 units in stock and utilizes the 4-SOPA (Type WX) package designation.

ABS10M-13 is a direct parametric equivalent with 4,060 units in stock, also using the 4-SOPA (Type WX) package designation. This part includes MSL 1 (Unlimited) moisture sensitivity rating and exhibits slightly higher reverse leakage current (10 µA vs. 5 µA @ 1000 V), which remains within acceptable operational limits for standard bridge rectifier applications.

HDS10M-13 is a parametric equivalent with 6,200 units in stock, utilizing the HDS package designation. This part includes MSL 1 (Unlimited) moisture sensitivity rating and maintains the lower reverse leakage current specification (5 µA @ 1000 V) identical to the ABS10TM.

All three parts satisfy identical electrical performance requirements and thermal operating ranges. Selection should prioritize availability, supply chain lead times, and specific PCB layout requirements related to package footprint compatibility.

Frequently Asked Questions (FAQ)

Q: Can ABS10M-13 replace ABS10TM in existing designs?

A: Yes. Both parts maintain identical electrical specifications for voltage rating (1 kV), current capacity (1 A), forward voltage drop (950 mV @ 500 mA), and operating temperature range (-55°C ~ 150°C). Both use the 4-SOPA (Type WX) package with 4-SMD, Gull Wing configuration. The ABS10M-13 exhibits slightly higher reverse leakage current (10 µA vs. 5 µA @ 1000 V), which does not affect standard rectification performance.

Q: Can HDS10M-13 replace ABS10TM in existing designs?

A: Yes. HDS10M-13 maintains identical electrical specifications and operating temperature range. The primary difference is the supplier device package designation (HDS vs. 4-SOPA Type WX). Both use 4-SMD, Gull Wing surface-mount configuration. PCB layout compatibility must be verified for the specific package footprint.

Q: What is the difference between the reverse leakage current specifications?

A: ABS10TM and HDS10M-13 specify 5 µA @ 1000 V reverse leakage current, while ABS10M-13 specifies 10 µA @ 1000 V. Both values are within standard bridge rectifier performance parameters and do not impact functional equivalence for typical single-phase rectification applications.

Q: Are all three parts RoHS3 compliant?

A: Yes. ABS10TM, ABS10M-13, and HDS10M-13 are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the significance of MSL rating on ABS10M-13 and HDS10M-13?

A: Both ABS10M-13 and HDS10M-13 carry MSL 1 (Unlimited) moisture sensitivity level rating, indicating these parts have no moisture sensitivity restrictions during storage and handling. The ABS10TM does not specify an MSL rating in the provided data.

Q: Can these parts be used interchangeably on the same PCB?

A: ABS10TM and ABS10M-13 use identical 4-SOPA (Type WX) package footprints and are directly interchangeable on PCB layouts. HDS10M-13 uses the HDS package designation; PCB footprint compatibility must be verified before substitution, as package dimensions may differ despite identical electrical specifications and surface-mount configuration.