ABS10M-13 Equivalent & Substitute Parts

Part Overview

The ABS10M-13 is a low-power bridge rectifier manufactured by Diodes Incorporated, designed for single-phase rectification applications. This surface-mount component operates at 1 kV peak reverse voltage with 1 A average rectified current capacity. The part is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

ABS10M-13

Diodes IncorporatedIn Stock: 4133ABS10M-13 Datasheet

Current PartRFQ

HDS10M-13

Diodes IncorporatedIn Stock: 6269HDS10M-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ABS10M-13 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 500 mA
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Equivalence Criteria:

• Mounting Type: Surface Mount
• Package / Case: 4-SMD, Gull Wing

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The HDS10M-13 meets all electrical, mechanical, and compliance requirements for direct substitution with the ABS10M-13. Both components share identical ratings for peak reverse voltage, average rectified current, forward voltage characteristics, and operating temperature range. Both are surface-mount devices in 4-SMD gull wing packages with equivalent environmental compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the ABS10M-13 and HDS10M-13 are Active product status components manufactured by Diodes Incorporated with full ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts is based on availability and application requirements:

ABS10M-13 Selection: Use when the 4-SOPA (Type WX) package designation is specified in design documentation or when inventory of 4060 pieces is available.

HDS10M-13 Selection: Use when the HDS package designation is specified or when lower reverse leakage current (5 µA versus 10 µA at 1000 V) is beneficial for the application. Higher inventory availability of 6200 pieces supports supply chain flexibility.

Both components satisfy identical electrical performance requirements for single-phase bridge rectification at 1 kV and 1 A ratings. The reverse leakage current difference does not affect substitution eligibility, as both values remain within acceptable operating parameters for standard bridge rectifier applications.

Frequently Asked Questions (FAQ)

Q: Can the HDS10M-13 directly replace the ABS10M-13 in existing designs?

A: Yes. Both components share identical electrical ratings (1 kV peak reverse voltage, 1 A average rectified current, 950 mV forward voltage at 500 mA), identical operating temperature range (-55°C to 150°C), and identical surface-mount 4-SMD gull wing packaging. Both are ROHS3 compliant with unlimited moisture sensitivity rating.

Q: What is the difference between the ABS10M-13 and HDS10M-13?

A: The primary difference is reverse leakage current: ABS10M-13 specifies 10 µA at 1000 V, while HDS10M-13 specifies 5 µA at 1000 V. The HDS10M-13 exhibits lower reverse leakage. Both components are otherwise electrically and mechanically equivalent.

Q: Are the package designations interchangeable?

A: The ABS10M-13 uses the 4-SOPA (Type WX) package designation, while the HDS10M-13 uses the HDS package designation. Both are 4-SMD gull wing surface-mount packages with identical mechanical dimensions and PCB footprints, making them physically interchangeable.

Q: Which part should be selected for new designs?

A: Selection depends on design specifications and supply chain requirements. If the design specifies either package type, use the designated part. If design flexibility exists, either part is acceptable. The HDS10M-13 offers lower reverse leakage current and higher inventory availability.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both the ABS10M-13 and HDS10M-13 operate across the identical temperature range of -55°C to 150°C junction temperature, supporting high-temperature circuit requirements.

Q: What compliance certifications apply to both parts?

A: Both components are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Both carry unlimited moisture sensitivity rating (MSL 1).