ABS10HREG Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The ABS10HREG is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, designed for surface mount applications. This component operates at 1 kV peak reverse voltage with an 800 mA average rectified current rating. The part is classified as Active product status and carries automotive-grade qualification under AEC-Q101 standard. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, procurement lead times, or packaging format requirements.

Substiute Parts

ABS10HREG

Taiwan Semiconductor CorporationIn Stock: 655ABS10HREG Datasheet

Current PartRFQ

ABS10H

Taiwan Semiconductor CorporationIn Stock: 6083ABS10H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ABS10HREG with equivalent parts is determined by strict electrical and mechanical parameter matching. The following criteria establish substitution validity:

Electrical Parameters (Must Match Exactly):

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 800 mA
• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 400 mA
• Current - Reverse Leakage @ Vr: 10 µA @ 1000 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Surface Mount
• Package / Case: 4-SMD, Gull Wing
• Base Product Number: ABS10

Compliance Parameters (Must Match Exactly):

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Packaging format (Tape & Reel versus standard packaging) does not affect electrical or mechanical compatibility and is therefore permitted to vary between the main part and substitute parts.

Parameter Comparison

Engineering Selection Recommendations

The ABS10H is a direct parametric equivalent to the ABS10HREG. Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications, mechanical dimensions, and compliance certifications. Both components maintain Active product status and carry AEC-Q101 automotive qualification with ROHS3 compliance.

The only difference between these parts is the packaging format: ABS10HREG is supplied in standard packaging, while ABS10H is supplied in Tape & Reel (TR) format. This packaging difference does not affect component performance, electrical characteristics, or mechanical compatibility in circuit applications.

Selection between ABS10HREG and ABS10H should be based on procurement requirements, inventory availability, and assembly process specifications. Both parts are suitable for direct substitution in automotive-grade applications requiring 1 kV, 800 mA single-phase bridge rectifier diodes with surface mount 4-SMD Gull Wing packaging.

Frequently Asked Questions (FAQ)

Q: Can ABS10H replace ABS10HREG in production assemblies?

A: Yes. The ABS10H is electrically and mechanically identical to the ABS10HREG. Both parts meet the same electrical specifications, temperature range, and automotive qualification standards. The only difference is packaging format (Tape & Reel versus standard packaging), which does not affect circuit performance or component functionality.

Q: Are there any electrical performance differences between ABS10HREG and ABS10H?

A: No. Both parts have identical electrical characteristics: 1 kV peak reverse voltage, 800 mA average rectified current, 950 mV forward voltage at 400 mA, and 10 µA reverse leakage current at 1000 V. Operating temperature range, forward voltage characteristics, and reverse leakage specifications are identical.

Q: Do both parts have the same package dimensions?

A: Yes. Both ABS10HREG and ABS10H use the same 4-SMD Gull Wing package configuration. PCB footprints and assembly requirements are identical. The packaging format difference (Tape & Reel versus standard) refers only to how the components are supplied and does not affect physical dimensions or mounting specifications.

Q: Are both parts qualified for automotive applications?

A: Yes. Both ABS10HREG and ABS10H carry Automotive grade classification and AEC-Q101 qualification. Both parts are ROHS3 compliant and REACH unaffected, meeting automotive industry standards for reliability and environmental compliance.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on procurement lead times, inventory availability, and assembly process requirements. Both parts are Active status products with identical performance characteristics and automotive qualification.

Q: Is there a cost difference between these parts?

A: Cost information is not provided in the technical specifications. Procurement decisions should be directed to component suppliers for current pricing and availability data.