ABGD301N-Y Equivalent & Substitute Parts

Part Overview

The ABGD301N-Y is a 30mm pushbutton switch manufactured by IDEC, classified as a momentary action pushbutton with a 40mm mounting depth and shared contact configuration. This component is currently listed as obsolete product status. Due to its obsolete classification, identifying equivalent and substitute parts is essential for maintaining system functionality in applications where this component is specified or currently deployed.

Substiute Parts

ABGD301N-Y

IDECIn Stock: 674ABGD301N-Y Datasheet

Current PartRFQ

ABGD301NUY

IDECIn Stock: 988ABGD301NUY Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ABGD301N-Y is determined by the following critical parameters:

• Physical Form Factor: 30mm pushbutton configuration
• Functional Type: Momentary action switch with 40mm mounting depth
• Contact Configuration: Shared contact (1NC - one normally closed)
• Compliance Standards: ROHS3 compliance requirement
• Moisture Sensitivity: MSL 1 (Unlimited) classification
• Trade Classification: HTSUS 8536.50.9035 alignment

The substitute part ABGD301NUY maintains compatibility across all these critical parameters while offering active product status availability.

Parameter Comparison

Engineering Selection Recommendations

The ABGD301NUY is the direct substitute for the obsolete ABGD301N-Y. Both components share identical compliance certifications (ROHS3), moisture sensitivity classification (MSL 1), and trade codes (HTSUS 8536.50.9035). The substitute part maintains the same functional pushbutton switch architecture with 30mm form factor and 40mm mounting depth specifications.

The primary distinction is product status: ABGD301NUY is currently in active production with confirmed inventory availability (920 Pcs), whereas ABGD301N-Y is obsolete. For new designs or component replenishment, ABGD301NUY is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can ABGD301NUY directly replace ABGD301N-Y in existing applications?

A: Yes. Both components are manufactured by IDEC, share identical compliance standards (ROHS3 Compliant), moisture sensitivity classification (MSL 1), and trade codes (HTSUS 8536.50.9035). The 30mm pushbutton configuration and 40mm mounting depth are consistent across both part numbers.

Q: What is the difference between ABGD301N-Y and ABGD301NUY?

A: The primary difference is product status. ABGD301N-Y is obsolete, while ABGD301NUY is active production. Both components are functionally equivalent 30mm momentary pushbutton switches with shared contact configuration (1NC).

Q: Are there packaging differences between these parts?

A: ABGD301N-Y packaging is listed as standard (-), while ABGD301NUY is supplied in Bulk packaging. This distinction affects order quantities and handling but does not alter component functionality or electrical characteristics.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both ABGD301N-Y and ABGD301NUY are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity classification and EAR99 export control classification.