ABGD301N-G Equivalent & Substitute Parts

Part Overview

The ABGD301N-G is a 30mm pushbutton switch manufactured by IDEC, classified as a momentary action pushbutton with a 40mm mounting depth and single normally closed (1NC) contact configuration in green. This part is currently listed as obsolete, which necessitates identification of active equivalent models to maintain supply chain continuity and support ongoing maintenance or new installations requiring compatible components.

Substiute Parts

ABGD301N-G

IDECIn Stock: 825ABGD301N-G Datasheet

Current PartRFQ

ABGD301NUG

IDECIn Stock: 964ABGD301NUG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ABGD301NUG has been identified as a direct substitute for the ABGD301N-G based on the following criteria:

• Manufacturer Consistency: Both parts are manufactured by IDEC, ensuring design and quality standards alignment
• Functional Equivalence: Both are 30mm pushbutton switches with momentary action and 1NC contact configuration
• Mechanical Compatibility: Both share the 40mm mounting depth specification
• Regulatory Compliance: Both maintain ROHS3 compliance and identical ECCN and HTSUS classifications
• Environmental Rating: Both carry MSL 1 (Unlimited) moisture sensitivity level
• Base Product Number: The ABGD301NUG shares the base product number ABGD301 with the original part, confirming design lineage and compatibility

The primary distinction is product status: ABGD301N-G is obsolete while ABGD301NUG is active, making the latter the recommended source for new procurement.

Parameter Comparison

Engineering Selection Recommendations

The ABGD301NUG is the appropriate selection for applications currently specified with ABGD301N-G. The substitute maintains full compliance with ROHS3 requirements and carries identical regulatory classifications (ECCN EAR99, HTSUS 8536.50.9035). The active product status of ABGD301NUG ensures ongoing availability and manufacturer support, eliminating supply chain risk associated with the obsolete ABGD301N-G designation.

Frequently Asked Questions (FAQ)

Q: Can ABGD301NUG be used as a direct replacement for ABGD301N-G?

A: Yes. Both parts share identical functional specifications, mechanical dimensions, contact configuration (1NC), and regulatory compliance status. The ABGD301NUG is the active equivalent manufactured by IDEC.

Q: What is the difference between ABGD301N-G and ABGD301NUG?

A: The primary difference is product status. ABGD301N-G is obsolete, while ABGD301NUG is active. Both parts maintain the same electrical and mechanical characteristics, including 30mm size, momentary action, 40mm mounting depth, and ROHS3 compliance.

Q: Are there packaging differences between these parts?

A: ABGD301N-G packaging information was not specified in the original documentation. ABGD301NUG is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both ABGD301N-G and ABGD301NUG are ROHS3 compliant and carry identical ECCN (EAR99) and HTSUS (8536.50.9035) classifications.

Q: Why is ABGD301N-G listed as obsolete?

A: Obsolescence typically results from manufacturer discontinuation decisions. IDEC has transitioned support to the ABGD301NUG variant, which maintains full functional and mechanical compatibility.