ABD210N-Y Equivalent & Substitute Parts

Part Overview

The ABD210N-Y is a 30mm pushbutton switch manufactured by IDEC, classified as a momentary action pushbutton with external connection. This component is currently listed as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing maintenance and new design applications. The part maintains ROHS3 compliance and unlimited moisture sensitivity rating, making it suitable for industrial control panel applications.

Substiute Parts

ABD210N-Y

IDECIn Stock: 1171ABD210N-Y Datasheet

Current PartRFQ

ABD210NUY

IDECIn Stock: 1062ABD210NUY Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ABD210NUY qualifies as a direct substitute based on the following alignment criteria:

• Manufacturer: IDEC (same manufacturer ensures design continuity)
• Base Product Number: ABD210 (common platform)
• Mounting Configuration: Panel Mount, Front (identical mechanical interface)
• Switch Type: SPST-NO (Single Pole Single Throw - Normally Open, matching circuit topology)
• Switch Function: Off-Mom (momentary action, identical operational behavior)
• Actuator Type: Round, Button with 30.50mm circular panel cutout (compatible with existing panel openings)
• Electrical Ratings: 10A AC at 110V, 8A DC at 24V (suitable for standard industrial control circuits)
• Ingress Protection: IP65 (dust tight, water resistant)
• RoHS Status: ROHS3 Compliant (regulatory alignment)
• Moisture Sensitivity Level: 1 (Unlimited, matching environmental tolerance)
• ECCN and HTSUS: Identical classification codes

Parameter Comparison

Engineering Selection Recommendations

The ABD210NUY is the direct equivalent for ABD210N-Y replacement. Selection is based on:

• Active product status: ABD210NUY is currently in active production, ensuring long-term availability and supply chain continuity
• Identical regulatory compliance: Both parts maintain ROHS3 compliance and EAR99 classification
• Matching environmental specifications: Moisture sensitivity level 1 (unlimited) ensures equivalent performance in industrial environments
• Same manufacturer platform: IDEC ABD210 series design ensures mechanical and electrical compatibility
• Screw terminal termination: Enables direct integration into existing wiring configurations without adapter requirements

Frequently Asked Questions (FAQ)

Q: Can ABD210NUY be used as a direct replacement for ABD210N-Y in existing installations?

A: Yes. Both parts share identical mounting interfaces (30mm panel cutout), circuit topology (SPST-NO), and operational function (momentary action). The screw terminal configuration allows direct connection without modification.

Q: What is the significance of the product status change from Obsolete to Active?

A: ABD210N-Y is no longer manufactured. ABD210NUY is the current production equivalent from IDEC, ensuring availability for replacement stock and new applications.

Q: Are there differences in electrical performance between these parts?

A: ABD210NUY specifies 10A AC at 110V and 8A DC at 24V ratings. The original ABD210N-Y does not provide detailed electrical specifications in available documentation. These ratings are standard for the IDEC ABD210 platform and are suitable for typical industrial control applications.

Q: Does the panel cutout dimension difference (30mm vs 30.50mm) affect compatibility?

A: The 30.50mm specification for ABD210NUY represents the actual circular cutout requirement. This is compatible with standard 30mm panel openings used for IDEC 30mm pushbutton switches.

Q: Are packaging and certification requirements identical?

A: Both parts maintain ROHS3 compliance, EAR99 export classification, and unlimited moisture sensitivity rating (MSL 1). Packaging format differs (original unspecified vs. Bulk for substitute), but this does not affect functional compatibility.