ABD110N-S Equivalent & Substitute Parts

Part Overview

The ABD110N-S is a 30mm pushbutton switch manufactured by IDEC, classified as a standard panel-mount pushbutton with momentary operation. This part is currently listed as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing applications and new designs. The ABD110N-S maintains ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), making it suitable for industrial control applications requiring reliable switching performance.

Substiute Parts

ABD110N-S

IDECIn Stock: 957ABD110N-S Datasheet

Current PartRFQ

ABD110NUS

IDECIn Stock: 1016ABD110NUS Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ABD110NUS qualifies as a direct substitute for the ABD110N-S based on the following alignment of critical parameters:

• Manufacturer: Both parts are manufactured by IDEC, ensuring design and quality consistency
• Base Product Series: Both derive from the ABD110 base product family
• Panel Mount Configuration: Both are front-panel mount pushbutton switches with 30mm form factor
• Compliance Standards: Both maintain ROHS3 compliance and MSL 1 rating
• Regulatory Classification: Both share identical ECCN (EAR99) and HTSUS (8536.50.9035) codes
• Functional Category: Both are momentary-operation pushbutton switches suitable for industrial control applications

Parameter Comparison

Engineering Selection Recommendations

The ABD110NUS is the designated substitute for the obsolete ABD110N-S. Selection of this alternative is based on:

• Product Status Alignment: The ABD110NUS maintains active production status, ensuring long-term availability and supply chain continuity
• Compliance Equivalence: Both parts maintain identical ROHS3 compliance and MSL 1 ratings, satisfying regulatory and environmental requirements
• Manufacturer Consistency: IDEC manufacturing ensures design compatibility and quality standards equivalent to the original part
• Regulatory Classification: Identical ECCN and HTSUS codes confirm that no additional export or tariff considerations apply to the substitute
• Inventory Availability: Both parts maintain adequate stock levels for procurement

Frequently Asked Questions (FAQ)

Q: Can ABD110NUS be used as a direct replacement for ABD110N-S in existing applications?

A: Yes. Both parts share the same manufacturer (IDEC), base product family (ABD110), panel-mount configuration, and compliance certifications. The ABD110NUS is the active production equivalent of the obsolete ABD110N-S.

Q: What are the key electrical specifications of the ABD110NUS?

A: The ABD110NUS is rated for 10A AC at 110V and 8A DC at 24V. It features SPST-NO (Single Pole Single Throw - Normally Open) circuit configuration with momentary (Off-Mom) switch function.

Q: What is the panel cutout requirement for the ABD110NUS?

A: The ABD110NUS requires a circular panel cutout of 30.50mm diameter, consistent with the 30mm form factor designation.

Q: Are there any differences in termination between the two parts?

A: The ABD110NUS uses screw terminal termination. The ABD110N-S termination style is not specified in available documentation.

Q: What ingress protection rating does the ABD110NUS provide?

A: The ABD110NUS provides IP65 protection, classified as dust tight and water resistant, suitable for industrial control environments.

Q: Are both parts RoHS compliant?

A: Yes. Both the ABD110N-S and ABD110NUS maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).