Equivalent & Substitute Parts for ABC-13-R Ceramic Cartridge Fuse

Part Overview

The ABC-13-R is a 13 A ceramic cartridge fuse manufactured by Eaton - Electronics Division, rated for 250 V AC and 125 V DC operation. This fast-blow fuse is designed for use in 3AB, 3AG holder configurations with dimensions of 0.250" diameter by 1.250" length. The part maintains Active product status and holds CSA and UL approvals. Substitute parts are identified when electrical ratings, mechanical dimensions, fuse type, response characteristics, and approval certifications remain identical across manufacturers or product variants.

Substiute Parts

ABC-13-R

Eaton - Electronics DivisionIn Stock: 853ABC-13-R Datasheet

Current PartRFQ

BK/ABC-13-R

Eaton - Electronics DivisionIn Stock: 1416BK/ABC-13-R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ABC-13-R is determined by strict equivalence across the following parameters:

• Current Rating: 13 A (exact match required)
• Voltage Rating - AC: 250 V (exact match required)
• Voltage Rating - DC: 125 V (exact match required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" (exact match required)
• Size / Dimension: 0.250" Dia x 1.250" L (exact match required)
• Mounting Type: Requires Holder (exact match required)
• Approval Agency: CSA, UL (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

The substitute part BK/ABC-13-R meets all equivalence criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both ABC-13-R and BK/ABC-13-R are Active status products manufactured by Eaton - Electronics Division with identical electrical and mechanical specifications. Both parts hold CSA and UL approvals and maintain ROHS3 compliance. Selection between these parts may be based on inventory availability, lead time, or procurement source requirements, as all technical parameters are equivalent. The BK/ABC-13-R variant currently maintains higher inventory levels (1342 Pcs versus 824 Pcs for the primary part number).

Frequently Asked Questions (FAQ)

Q: Can BK/ABC-13-R be used as a direct replacement for ABC-13-R?

A: Yes. BK/ABC-13-R is a parametric equivalent with identical current rating (13 A), voltage ratings (250 V AC / 125 V DC), fuse type (Cartridge, Ceramic), response time (Fast Blow), package configuration (3AB, 3AG), physical dimensions (0.250" Dia x 1.250" L), and approval certifications (CSA, UL).

Q: Are there any compatibility issues with existing fuse holders?

A: No. Both parts require the same holder type (3AB, 3AG) and share identical physical dimensions (0.250" diameter x 1.250" length). They are mechanically and electrically interchangeable in any circuit designed for 13 A, 250 V AC / 125 V DC ceramic cartridge fuses.

Q: What is the difference between ABC-13-R and BK/ABC-13-R?

A: The parts are electrically and mechanically identical. The BK prefix designation indicates a product variant or packaging configuration from Eaton - Electronics Division. All critical parameters—current rating, voltage ratings, fuse type, response time, dimensions, and certifications—are equivalent.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both ABC-13-R and BK/ABC-13-R hold CSA and UL approvals and are ROHS3 compliant, meeting identical regulatory and environmental requirements.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection may be based on availability, procurement lead time, or supplier preference, as all technical and compliance parameters are equivalent.