AB6005G RF EMI Absorbing Sheet - Equivalent & Substitute Parts

Part Overview

The AB6005G is a non-conductive, single-sided RF EMI absorbing sheet manufactured by 3M, with dimensions of 11.693" × 10.000" × 0.004" (297.00mm × 254.00mm × 0.11mm). This product is classified as obsolete, making identification of suitable substitute components necessary for ongoing applications requiring RF electromagnetic interference absorption in this size range and thickness specification.

Substiute Parts

AB6005G

3MIn Stock: 862AB6005G Datasheet

Current PartRFQ

NS1010

Laird Technologies EMIIn Stock: 1107NS1010 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AB6005G is determined by the following critical parameters:

• Dimensional Compatibility: Length, width, and thickness must accommodate the application space. The AB6005G measures 11.693" × 10.000" × 0.004".
• Adhesive Configuration: The single-sided adhesive application method must match or be compatible with mounting requirements.
• Operating Temperature Range: The substitute must maintain performance across -30°C to 105°C.
• Electrical Properties: Non-conductive adhesive specification for electrical isolation.
• Moisture Sensitivity: MSL rating determines storage and handling requirements.

The NS1010 (Laird Technologies EMI) qualifies as a substitute based on comparable dimensional specifications (11.811" × 8.268" × 0.004"), similar thickness, overlapping operating temperature range (-40°C ~ 105°C), and single-sided adhesive application. The NS1010 is an active product with current manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

The NS1010 is the manufacturer-recommended substitute for the obsolete AB6005G. Selection should be based on the following factors:

• Product Status: The NS1010 maintains active manufacturing status, ensuring continued availability and supply chain reliability.
• Compliance Certifications: Both parts share identical ECCN (EAR99) and HTSUS (3919.90.5060) classifications, confirming regulatory equivalence for export and tariff purposes. The NS1010 carries RoHS3 compliance and REACH unaffected status.
• Dimensional Variance: The NS1010 width is 1.732" (44.00mm) narrower than the AB6005G. Applications requiring the full 10.000" width must account for this reduction or consider alternative sourcing.
• Temperature Performance: The NS1010 extends the lower operating temperature limit to -40°C, providing enhanced cold-temperature capability.
• Adhesive Specification: The NS1010 uses Pressure Sensitive Adhesive (PSA) rather than non-conductive adhesive. Electrical isolation requirements must be evaluated for compatibility.

Frequently Asked Questions (FAQ)

Q: Can the NS1010 directly replace the AB6005G in all applications?

A: The NS1010 is dimensionally similar in length and thickness but narrower in width (8.268" vs. 10.000"). Applications requiring the full width of the AB6005G must evaluate whether the reduced width accommodates the intended mounting area. The PSA adhesive type differs from the non-conductive adhesive of the AB6005G; electrical isolation requirements must be confirmed.

Q: What is the significance of the width difference between these parts?

A: The AB6005G is 10.000" wide, while the NS1010 is 8.268" wide—a difference of 1.732" (44.00mm). This reduction may affect coverage area in applications with strict dimensional constraints. Component selection should verify that the narrower width meets application requirements.

Q: Are there compliance or regulatory differences between these parts?

A: Both parts share identical ECCN (EAR99) and HTSUS (3919.90.5060) classifications. The NS1010 includes RoHS3 compliance and REACH unaffected status, providing additional regulatory documentation. No compliance barriers exist for substitution from a regulatory standpoint.

Q: How do the operating temperature ranges compare?

A: The AB6005G operates from -30°C to 105°C, while the NS1010 operates from -40°C to 105°C. The NS1010 provides an extended lower temperature capability of 10°C, beneficial for applications in cold environments.

Q: What is the difference between non-conductive adhesive and pressure-sensitive adhesive (PSA)?

A: Non-conductive adhesive is formulated to provide electrical isolation, preventing current flow through the adhesive layer. PSA is a general-purpose adhesive that provides mechanical bonding without specific electrical properties. Applications requiring electrical isolation must confirm that PSA meets isolation requirements.

Q: What does MSL 1 (Unlimited) mean for the AB6005G?

A: Moisture Sensitivity Level 1 indicates the lowest moisture sensitivity classification, meaning the component has unlimited shelf life under standard storage conditions without requiring desiccant packaging or moisture-controlled environments. The NS1010 lists MSL as Not Applicable, indicating it does not require moisture-sensitive handling.