AB5016RF RF Ferrite Sheet Equivalent & Substitute Parts

Part Overview

The AB5016RF is a flexible RF EMI ferrite sheet manufactured by 3M, featuring non-conductive, single-sided adhesive construction. This component is designed for electromagnetic interference suppression in RF applications. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement planning.

Substiute Parts

AB5016RF

3MIn Stock: 1142AB5016RF Datasheet

Current PartRFQ

364001

Würth ElektronikIn Stock: 907364001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AB5016RF is determined by the following critical parameters:

• Dimensional Compatibility: Length, width, and thickness must accommodate the application space
• Adhesive Configuration: Non-conductive, single-sided adhesive is required
• Thermal Performance: Operating temperature range must meet or exceed application requirements
• Material Composition: Ferrite-based construction for RF EMI suppression
• Electrical Properties: Non-conductive material specification

The substitute part 364001 (Würth Elektronik WE-FSFS series) meets these criteria with minor dimensional variation and enhanced thermal range.

Parameter Comparison

Engineering Selection Recommendations

The 364001 (Würth Elektronik WE-FSFS) is a direct functional substitute for the obsolete AB5016RF. Both components share identical thickness and adhesive configuration. The substitute offers a larger surface area (4.724" vs 4.528") and an extended lower operating temperature limit (-40°C vs -30°C), providing additional design margin in thermal environments.

The substitute part maintains active product status with ROHS3 compliance and REACH unaffected certification, supporting long-term supply chain continuity and regulatory compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the 364001 be used as a direct replacement for AB5016RF?

A: Yes. Both components feature identical thickness (0.007"), non-conductive single-sided adhesive, and equivalent operating temperature upper limits. The 364001 provides slightly larger dimensions and extended lower temperature capability.

Q: What is the dimensional difference between these parts?

A: The AB5016RF measures 4.528" × 4.528", while the 364001 measures 4.724" × 4.724". The 0.196" increase in length and width must be verified against application space constraints.

Q: Are there packaging differences?

A: The AB5016RF packaging specification is not provided. The 364001 is supplied in tray packaging.

Q: Does the substitute meet compliance requirements?

A: The 364001 is ROHS3 compliant and REACH unaffected, supporting modern regulatory standards. Verify compliance requirements against your specific application.

Q: What is the material composition difference?

A: The AB5016RF material composition is not specified. The 364001 uses rubber, ferrite powder, and PET film construction for RF EMI suppression.