A60-114-331P4D2 Equivalent & Substitute Parts

Part Overview

The A60-114-331P4D2 is a 1-port RJ45 modular connector jack designed for 10/100/1000 Base-T Ethernet applications with AutoMDIX support. This through-hole mounted connector features a 90° right-angle orientation and is intended for PCB integration in network interface applications. The part is currently active in production with 686 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility within the same connector series.

Substiute Parts

A60-114-331P4D2

Mercury United Electronics, Inc.In Stock: 792A60-114-331P4D2 Datasheet

Current PartRFQ

A60-112-331P4D2

Mercury United Electronics, Inc.In Stock: 1013A60-112-331P4D2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The A60-112-331P4D2 qualifies as a direct substitute for the A60-114-331P4D2 based on the following critical parameters:

Matching Specifications:

• Connector Type: RJ45
• Number of Ports: 1
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Height Above Board: 0.535" (14.69mm)
• Applications: 10/100/1000 Base-T, AutoMDIX
• Number of Cores per Jack: 8
• Shielding: Shielded, EMI Finger
• Termination: Solder
• Housing Material: Polybutylene Terephthalate (PBT), Polyester, Glass Filled
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8536.69.4040

Both parts belong to the Mercury United Electronics A60 series and maintain functional equivalence for 10/100/1000 Base-T Ethernet connectivity with AutoMDIX capability.

Parameter Comparison

Engineering Selection Recommendations

Both the A60-114-331P4D2 and A60-112-331P4D2 are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component deployment. The A60-112-331P4D2 maintains higher inventory availability at 949 units compared to 686 units for the A60-114-331P4D2. Both parts satisfy the electrical and mechanical requirements for 10/100/1000 Base-T Ethernet applications with identical form factor, mounting configuration, and connector specifications. Selection between these parts should be based on inventory availability and supply chain requirements, as functional equivalence is established across all critical parameters.

Frequently Asked Questions (FAQ)

Q: Are the A60-114-331P4D2 and A60-112-331P4D2 electrically equivalent?

A: Yes. Both connectors support 10/100/1000 Base-T Ethernet with AutoMDIX functionality, feature 8-core RJ45 configuration, shielded design with EMI finger protection, and gold-plated contacts. Electrical performance is equivalent for network interface applications.

Q: Do these parts have identical PCB footprints?

A: Yes. Both parts share identical mounting specifications: through-hole termination, 90° right-angle orientation, and 0.535" (14.69mm) height above board. PCB layout compatibility is maintained.

Q: What are the compliance differences between these parts?

A: Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS code 8536.69.4040. No compliance differentiation exists between the two parts.

Q: Can I substitute A60-112-331P4D2 for A60-114-331P4D2 in existing designs?

A: Yes. The parts are functionally and mechanically equivalent. No design modifications are required for substitution in applications currently using the A60-114-331P4D2.

Q: What is the difference between the A60-114 and A60-112 base product numbers?

A: The base product numbers indicate different internal configurations within the A60 series. However, the specific part variants A60-114-331P4D2 and A60-112-331P4D2 maintain equivalent external specifications and performance characteristics for 10/100/1000 Base-T applications.