A201416RC Equivalent & Substitute Parts

Part Overview

The A201416RC is a 16-circuit barrier block connector manufactured by Eaton - Electronics Division. This component is classified as a barrier strip terminal block with 0.375" (9.53mm) pitch spacing, designed for chassis and panel mounting applications. The part operates at 300V with a 30A current rating and accommodates wire gauges from 12-22 AWG.

The A201416RC is currently listed as obsolete. Identifying equivalent substitute parts is necessary to maintain system functionality and ensure continued availability for repair, maintenance, and new design implementations where this connector type is specified.

Substiute Parts

A201416RC

Eaton - Electronics DivisionIn Stock: 906A201416RC Datasheet

Current PartRFQ

T38320-16-0

Curtis IndustriesIn Stock: 1168T38320-16-0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the A201416RC is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Terminal Block Type: Barrier Block
• Number of Circuits: 16
• Pitch: 0.375" (9.53mm)
• Number of Rows: 1
• Voltage Rating: 300V
• Wire Gauge Compatibility: 12-22 AWG
• Top Termination: Screws
• Bottom Termination: Solder Turret, Insulated
• Barrier Type: 2 Wall (Dual)
• Mounting Type: Chassis, Panel
• Material Flammability Rating: UL94 V-0

The substitute part T38320-16-0 from Curtis Industries satisfies all mandatory matching parameters. Variations in current rating, insulation material, terminal screw finish, and operating temperature range do not prevent functional substitution when the application requirements fall within the substitute part's specifications.

Parameter Comparison

Engineering Selection Recommendations

The T38320-16-0 from Curtis Industries is a functional equivalent for the obsolete A201416RC. Both components share identical mechanical and electrical interface specifications, including circuit count, pitch, termination style, and voltage rating.

Selection Considerations:

The T38320-16-0 operates at a maximum current rating of 20A, compared to the A201416RC's 30A rating. Applications requiring current levels between 20A and 30A must be evaluated against the substitute part's specification. Applications operating at or below 20A per circuit are fully compatible.

The T38320-16-0 is ROHS3 compliant and carries active product status, ensuring continued availability and supply chain stability. The A201416RC is obsolete and no longer manufactured.

Both components carry UL94 V-0 flammability certification and are suitable for identical mounting configurations. The insulation material difference (Thermoplastic versus Polypropylene) and terminal screw finish variation (Zinc versus Nickel) do not affect functional compatibility in standard applications.

Frequently Asked Questions (FAQ)

Q: Can T38320-16-0 be used as a direct replacement for A201416RC in all applications?

A: The T38320-16-0 is mechanically and electrically compatible with the A201416RC for applications operating at 20A or below per circuit. Applications requiring the full 30A rating of the original part must be evaluated separately.

Q: What are the physical differences between these two parts?

A: Both parts share identical pitch (0.375"), circuit count (16), row configuration (1), and mounting type (Chassis, Panel). No physical modification is required for substitution.

Q: Are there compliance or certification differences?

A: Both parts carry UL94 V-0 flammability certification. The T38320-16-0 is ROHS3 compliant, while the A201416RC compliance status is not specified. Both are classified under ECCN EAR99 and HTSUS 8536.90.4000.

Q: What is the difference in operating temperature range?

A: The A201416RC operates from -40°C to 105°C. The T38320-16-0 specification indicates 105°C. Applications requiring operation below 0°C must be evaluated against the substitute part's lower temperature limit.

Q: Does the terminal screw finish difference affect performance?

A: Both Zinc and Nickel finishes provide corrosion resistance suitable for standard applications. The finish difference does not affect electrical performance or mechanical compatibility.

Q: Is the insulation material change from Thermoplastic to Polypropylene significant?

A: Both materials meet UL94 V-0 flammability requirements and are suitable for 300V applications. The material change does not affect functional compatibility in standard operating conditions.