A-2014-1-3 Modular Connector Jack 6P6C Vertical Unshielded

Part Overview

The A-2014-1-3 is a modular connector jack manufactured by Assmann WSW Components, designed for 6-position 6-contact (6P6C) applications including RJ11, RJ12, RJ14, and RJ25 standards. This through-hole vertical unshielded jack connector is actively produced and widely used in telecommunications and data communication applications. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when supply chain optimization is required.

Substiute Parts

A-2014-1-3

Assmann WSW ComponentsIn Stock: 1193A-2014-1-3 Datasheet

Current PartRFQ

0955222667

MolexIn Stock: 21310955222667 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the A-2014-1-3 are qualified based on the following critical parameters that must match or be compatible with the main part:

• Connector type: Jack
• Contact configuration: 6P6C (6-position 6-contact)
• Mounting method: Through hole
• Orientation: Vertical
• Shielding classification: Unshielded
• Termination method: Solder
• Operating temperature range: -40°C to 85°C minimum
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: MSL 1 (Unlimited)

The identified substitute part 0955222667 (Molex) meets all critical electrical and mechanical parameters required for direct substitution in applications using the A-2014-1-3.

Parameter Comparison

Engineering Selection Recommendations

Both the A-2014-1-3 and substitute part 0955222667 are active products with ROHS3 compliance and REACH unaffected status, making them suitable for current design implementations. The A-2014-1-3 (Assmann WSW Components) and 0955222667 (Molex) are functionally equivalent for 6P6C modular jack applications requiring through-hole vertical solder termination. Selection between these parts should be based on availability, lead time, and procurement requirements, as both meet identical electrical and mechanical specifications for RJ11, RJ12, RJ14, and RJ25 applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0955222667 be used as a direct replacement for the Assmann A-2014-1-3?

A: Yes. Both parts are 6P6C vertical unshielded jack connectors with identical contact configurations, mounting methods, termination types, and operating temperature ranges. They are electrically and mechanically interchangeable.

Q: What are the key differences between these two parts?

A: The primary differences are manufacturer identity and housing material composition. The A-2014-1-3 uses polyester glass-filled housing, while the 0955222667 uses liquid crystal polymer (LCP) glass-filled housing. Both materials meet the same performance requirements for this application class.

Q: Are there any compatibility concerns with PCB layout or footprint?

A: Both parts share identical mounting specifications (through-hole, vertical orientation, single port, single row configuration) and are designed for the same 6P6C connector standard. PCB footprints are compatible.

Q: Do both parts support the same RJ standards?

A: Yes. Both the A-2014-1-3 and 0955222667 support RJ11, RJ12, RJ14, and RJ25 standards with user-selectable tab direction.

Q: What is the significance of the contact finish thickness difference?

A: The A-2014-1-3 specifies 50.0µin (1.27µm) gold finish thickness, while the 0955222667 specifies flash gold finish. Both provide adequate contact protection and conductivity for the intended application. Flash finish represents a thinner coating applied to the contact surface.

Q: Are both parts suitable for high-volume production?

A: Yes. Both parts are actively produced and available in tray packaging suitable for automated assembly processes. Current inventory levels support production requirements.