A-2014-1-2 Modular Jack Connector 6P6C Vertical Unshielded

Part Overview

The A-2014-1-2 is a modular jack connector manufactured by Assmann WSW Components, designed for 6-position 6-contact (6P6C) applications including RJ11, RJ12, RJ14, and RJ25 standards. This vertical unshielded connector features through-hole solder termination and is currently in active production status with 729 units in stock. Alternative models are identified to support supply chain flexibility, design revisions, and inventory management across manufacturing environments.

Substiute Parts

A-2014-1-2

Assmann WSW ComponentsIn Stock: 832A-2014-1-2 Datasheet

Current PartRFQ

0955222667

MolexIn Stock: 21310955222667 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the A-2014-1-2 is determined by strict alignment of the following parameters:

• Connector type: Jack
• Contact configuration: 6P6C (RJ11, RJ12, RJ14, RJ25)
• Mounting method: Through hole
• Orientation: Vertical
• Shielding: Unshielded
• Termination method: Solder
• Operating temperature range: -40°C to 85°C minimum
• Regulatory compliance: ROHS3 compliant

The identified substitute part 0955222667 (Molex) meets all mandatory electrical and mechanical parameters. Both connectors share identical contact positions, mounting orientation, and environmental ratings. Differences in contact material composition and housing material do not affect functional compatibility within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both the A-2014-1-2 and 0955222667 are active production components with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Availability and lead time requirements
• Inventory positioning and supply chain strategy
• Manufacturer preference or qualification requirements
• Contact material specifications (Phosphor Bronze vs. Copper Alloy)
• Housing material requirements (Polyester Glass Filled vs. Liquid Crystal Polymer Glass Filled)

Both connectors satisfy all mandatory electrical and mechanical parameters for 6P6C modular jack applications with vertical through-hole solder termination.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0955222667 be used as a direct replacement for the Assmann A-2014-1-2?

A: Yes. Both connectors meet identical specifications for connector type, contact configuration (6P6C), mounting method (through hole vertical), termination (solder), and operating temperature range (-40°C to 85°C). Both are ROHS3 compliant with gold-plated contacts and board lock features.

Q: What are the differences between these two parts?

A: The primary differences are contact material (Phosphor Bronze vs. Copper Alloy) and housing material (Polyester Glass Filled vs. Liquid Crystal Polymer Glass Filled). These material variations do not affect functional compatibility for the specified 6P6C modular jack application.

Q: Are there any compatibility concerns with PCB layout or footprint?

A: Both connectors feature identical through-hole vertical orientation with the same contact configuration. PCB footprint compatibility should be verified against the specific mechanical drawings for each manufacturer, as housing dimensions may vary slightly.

Q: Do both parts support the same RJ standards?

A: Yes. Both the A-2014-1-2 and 0955222667 support RJ11, RJ12, RJ14, and RJ25 standards with 6-position 6-contact configuration.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.