A201110MP8 Equivalent & Substitute Parts Reference

Part Overview

The A201110MP8 is a 10-circuit barrier block connector manufactured by Eaton Electronics Division, designed for panel and chassis mounting applications. This component features a 0.375" (9.53mm) pitch with screw termination on the top and solder turret termination on the bottom, rated for 30A at 300V with wire gauges from 12-22 AWG.

The A201110MP8 carries an obsolete product status. Identifying equivalent substitute parts ensures design continuity and maintains system reliability for applications currently utilizing this connector in production or maintenance scenarios.

Substiute Parts

A201110MP8

Eaton - Electronics DivisionIn Stock: 1098A201110MP8 Datasheet

Current PartRFQ

JC6-T207-10

TE Connectivity AMP ConnectorsIn Stock: 756JC6-T207-10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the A201110MP8 is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Terminal block type: Barrier Block
• Number of circuits: 10
• Pitch: 0.375" (9.53mm)
• Number of rows: 1
• Top termination: Screws
• Bottom termination: Solder Turret
• Barrier type: 2 Wall (Dual)
• Voltage rating: 300V
• Wire gauge range: 12-22 AWG
• Insulation material: Thermoplastic
• Flammability rating: UL94 V-0
• Mounting type: Chassis, Panel

Parameters Permitting Variation:

• Current rating: Substitute must meet or exceed 30A requirement
• Operating temperature: Substitute must support minimum -40°C ~ 105°C range
• Terminal screw material and finish
• Manufacturer identity
• Product status (active substitutes acceptable for obsolete parts)

The JC6-T207-10 from TE Connectivity AMP Connectors satisfies all mandatory parameters. A variance exists in current rating: the substitute is rated for 20A versus the original 30A specification. This represents a reduction in current capacity and requires engineering evaluation for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

JC6-T207-10 Substitution Considerations:

The JC6-T207-10 provides functional equivalence for the obsolete A201110MP8 across all critical mechanical and electrical parameters. The substitute maintains identical circuit count, pitch, termination style, voltage rating, and wire gauge compatibility.

Current Rating Differential: The JC6-T207-10 is rated for 20A continuous current, compared to the A201110MP8 specification of 30A. Applications operating at or below 20A continuous current are fully compatible. Applications requiring the full 30A capacity of the original part require alternative solutions or derating analysis.

Compliance Advantage: The JC6-T207-10 carries active product status and ROHS3 compliance certification, providing supply chain continuity and regulatory alignment for new production or maintenance applications.

Temperature Range: The JC6-T207-10 specification indicates 105°C maximum operating temperature. The original part specifies -40°C ~ 105°C. Applications requiring the -40°C minimum operating temperature must confirm the substitute's low-temperature performance through TE Connectivity technical documentation.

Bottom Termination Enhancement: The JC6-T207-10 offers insulated solder turret termination as an option, providing additional electrical isolation compared to standard solder turret configurations.

Frequently Asked Questions (FAQ)

Q: Can the JC6-T207-10 directly replace the A201110MP8 in all applications?

A: Direct replacement is possible for applications operating at 20A or below. The 10A reduction in current rating must be evaluated against actual circuit requirements. All other electrical and mechanical parameters align for direct substitution.

Q: What is the impact of the current rating difference?

A: The A201110MP8 supports 30A continuous current; the JC6-T207-10 supports 20A. If your application draws more than 20A per circuit, the substitute cannot be used without circuit redesign or load redistribution.

Q: Are the physical dimensions and mounting compatible?

A: Yes. Both parts feature identical 0.375" (9.53mm) pitch, 10-circuit configuration, single-row layout, flange mounting, and chassis/panel mounting capability. PCB footprints and mechanical mounting are interchangeable.

Q: Does the JC6-T207-10 meet the same safety standards?

A: Yes. Both parts carry UL94 V-0 flammability rating and 300V voltage rating. The JC6-T207-10 additionally carries ROHS3 compliance certification.

Q: What is the difference between standard and insulated solder turret termination?

A: The JC6-T207-10 offers insulated solder turret as an option, providing electrical isolation at the solder connection point. The standard configuration provides direct solder connection. Both are compatible with the A201110MP8 application requirements.

Q: Is the operating temperature range identical?

A: The A201110MP8 specifies -40°C ~ 105°C. The JC6-T207-10 specification indicates 105°C maximum. Applications requiring -40°C minimum operating temperature should confirm low-temperature performance with TE Connectivity technical data.

Q: What is the availability status of each part?

A: The A201110MP8 is obsolete with 1020 pieces in current inventory. The JC6-T207-10 is active product with 746 pieces in current inventory, providing ongoing supply chain access.

Q: Are wire gauge and termination screw specifications compatible?

A: Yes. Both parts accept 12-22 AWG wire and feature screw-type top termination. Screw material differs (steel vs. copper) but both provide equivalent electrical and mechanical performance for standard applications.