A-2004-1-4-LP-R Modular Connector Jack 6P6C Right Angle Equivalent & Substitute Parts

Part Overview

The A-2004-1-4-LP-R is a modular connector jack manufactured by Assmann WSW Components, designed for 6P6C (RJ11, RJ12, RJ14, RJ25) applications with 90° right angle orientation. This connector features through-hole solder termination, unshielded construction, and board lock functionality. The part is currently listed as obsolete, making identification of active equivalent alternatives essential for ongoing production and maintenance applications.

Substiute Parts

A-2004-1-4-LP-R

Assmann WSW ComponentsIn Stock: 846A-2004-1-4-LP-R Datasheet

Current PartRFQ

A-2004-1-4-LP-N-R

Assmann WSW ComponentsIn Stock: 17410A-2004-1-4-LP-N-R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The A-2004-1-4-LP-R has one direct substitute: A-2004-1-4-LP-N-R. This substitution is valid based on identical electrical and mechanical parameters across all critical specifications. Both parts share the same connector type (Jack), contact configuration (6P6C), mounting method (Through Hole), orientation (90° Right Angle), termination type (Solder), shielding classification (Unshielded), contact materials (Phosphor Bronze with Gold finish), housing material (PBT Glass Filled), and operating temperature range (-40°C to 85°C).

The primary distinction between these parts is packaging format and product status. The substitute part A-2004-1-4-LP-N-R is supplied in Tray packaging and maintains Active product status, whereas the original part uses different packaging and is Obsolete. This substitution maintains full functional and mechanical compatibility for all application requirements.

Parameter Comparison

Engineering Selection Recommendations

The A-2004-1-4-LP-N-R is the appropriate selection for new designs and production applications. This part maintains identical electrical and mechanical specifications to the obsolete A-2004-1-4-LP-R while offering the advantage of Active product status and documented ROHS3 compliance. Both parts satisfy REACH and EAR99 export classification requirements.

For applications currently using the A-2004-1-4-LP-R, direct substitution with A-2004-1-4-LP-N-R is valid without design modification. The Tray packaging format of the substitute part is standard for production environments and does not affect functional performance or board-level integration.

Frequently Asked Questions (FAQ)

Q: Can A-2004-1-4-LP-N-R replace A-2004-1-4-LP-R in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all critical parameters including connector type, contact configuration, mounting method, orientation, termination type, and operating temperature range. Direct substitution is valid without design changes.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format (Tray for the substitute) and product status (Active versus Obsolete). The substitute part also includes documented ROHS3 compliance. All functional and mechanical specifications are identical.

Q: Are there any compatibility concerns with the packaging change?

A: No. The packaging format change from unspecified to Tray does not affect component functionality, board-level integration, or electrical performance. Tray packaging is standard for production applications.

Q: Do both parts meet the same compliance standards?

A: Both parts are REACH Unaffected and classified as EAR99. The substitute part includes documented ROHS3 compliance. Both share identical HTSUS classification (8536.69.4040).

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -40°C to 85°C, suitable for industrial and commercial applications.

Q: Are these connectors suitable for RJ11, RJ12, RJ14, and RJ25 applications?

A: Yes. Both parts are specified for 6P6C configuration, which accommodates RJ11, RJ12, RJ14, and RJ25 connector standards.