A06-LCG-T Equivalent & Substitute Parts

Part Overview

The A06-LCG-T is a 6-position DIP socket manufactured by Assmann WSW Components, designed for through-hole mounting applications requiring gold-plated contacts. This component features a 0.3" (7.62mm) row spacing configuration with 0.100" (2.54mm) pitch mating contacts. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

A06-LCG-T

Assmann WSW ComponentsIn Stock: 809A06-LCG-T Datasheet

Current PartRFQ

110-13-306-41-001000

Mill-Max Manufacturing Corp.In Stock: 869110-13-306-41-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the A06-LCG-T is determined by the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 6 (2 x 3)
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing: 0.3" (7.62mm)
• Mounting Type: Through Hole
• Contact Finish - Mating: Gold

Compatible Variation Parameters:

• Operating Temperature Range: Substitute must meet or exceed -55°C ~ 105°C
• Current Rating: Substitute must meet or exceed 1 A
• Contact Resistance: Substitute must meet or be lower than 30mOhm
• Housing Material: Acceptable alternatives include PBT glass-filled or PCT polyester formulations
• Termination Post Length: Minor variations acceptable within standard manufacturing tolerances

The substitute part 110-13-306-41-001000 from Mill-Max Manufacturing Corp. satisfies all mandatory matching parameters and exceeds performance specifications in temperature range, current rating, and contact finish thickness.

Parameter Comparison

Engineering Selection Recommendations

The 110-13-306-41-001000 from Mill-Max Manufacturing Corp. is the designated substitute for the obsolete A06-LCG-T. Selection is based on the following engineering criteria:

Functional Compatibility: Both parts maintain identical mechanical and electrical interfaces with 6-position DIP configuration, 0.3" row spacing, and 0.100" pitch specifications. Pin-to-pin compatibility is assured for direct replacement in existing PCB designs.

Performance Enhancement: The substitute provides superior specifications across multiple parameters: extended operating temperature range (-55°C ~ 125°C versus -55°C ~ 105°C), increased current capacity (3 A versus 1 A), and documented contact finish thickness (30.0µin mating, 10.0µin post).

Compliance Status: The Mill-Max part carries ROHS3 compliance certification, addressing regulatory requirements that the original Assmann component does not meet. Both parts maintain REACH Unaffected status and EAR99 export classification.

Product Availability: The substitute is classified as Active with documented inventory availability, ensuring long-term procurement viability compared to the obsolete status of the original part.

Frequently Asked Questions (FAQ)

Q: Can the 110-13-306-41-001000 be used as a direct replacement for the A06-LCG-T?

A: Yes. Both parts share identical pin counts (6 positions), row spacing (0.3"), mating pitch (0.100"), contact finish (gold), and mounting configuration (through-hole). The substitute meets all mechanical and electrical interface requirements for direct PCB substitution.

Q: What are the differences in termination post length between these parts?

A: The A06-LCG-T has a post length of 0.130" (3.30mm), while the 110-13-306-41-001000 measures 0.125" (3.18mm). This 0.005" (0.127mm) difference falls within standard PCB design tolerances for through-hole solder joint formation and does not affect functional compatibility.

Q: Does the higher current rating of the substitute part affect compatibility?

A: No. The 110-13-306-41-001000 is rated for 3 A compared to the original 1 A specification. Higher current capacity is a performance enhancement that does not compromise compatibility. The substitute can safely handle applications designed for the original 1 A rating.

Q: What is the significance of the extended operating temperature range in the substitute?

A: The Mill-Max part operates from -55°C to 125°C, compared to -55°C to 105°C for the Assmann part. This 20°C extension at the upper limit provides additional thermal margin for applications operating in elevated temperature environments, though it does not affect compatibility with designs specified for the original temperature range.

Q: How do the contact finish specifications compare?

A: The A06-LCG-T does not specify contact finish thickness values. The 110-13-306-41-001000 provides documented specifications: 30.0µin (0.76µm) for mating contacts and 10.0µin (0.25µm) for post contacts. Both use gold plating on beryllium copper (mating) and brass alloy (post) materials, ensuring equivalent electrical performance and corrosion resistance.

Q: What packaging options are available for the substitute?

A: The 110-13-306-41-001000 is supplied in tube packaging. The original A06-LCG-T packaging specification was not provided in the component data.

Q: Are there any compliance considerations when switching to the substitute?

A: Yes. The 110-13-306-41-001000 is ROHS3 compliant, while the A06-LCG-T is RoHS non-compliant. For applications subject to RoHS regulations, the substitute provides the necessary compliance certification. Both parts maintain REACH Unaffected status.