A0213X Equivalent & Substitute Parts Reference

Part Overview

The A0213X is a 30mm configurable switch body pushbutton operator manufactured by APEM Inc. as part of the A02 series. This non-illuminated, round pushbutton component is designed for maintained-type switch applications and requires separate contact block(s) and lens assemblies for complete functionality. The product is currently classified as obsolete, necessitating identification of active alternative components that maintain functional and mechanical compatibility for ongoing system support and new designs.

Substiute Parts

A0213X

APEM Inc.In Stock: 1142A0213X Datasheet

Current PartRFQ

LBW6ML-A0

IDECIn Stock: 1097LBW6ML-A0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the A0213X is determined by the following critical parameters:

• Actuator Type: Round pushbutton configuration
• Switch Type: Maintained operation
• Panel Cutout Dimensions: 30mm round mounting interface
• Compliance Standards: ROHS3 compliance and MSL rating

The identified substitute LBW6ML-A0 from IDEC maintains functional equivalence through matching actuator geometry, switch type, and compliance certifications. However, this substitute introduces an illumination feature (illuminated vs. non-illuminated) and operates with a smaller panel cutout dimension (22.3mm vs. 30mm), requiring mechanical interface evaluation during implementation.

Parameter Comparison

Engineering Selection Recommendations

The LBW6ML-A0 serves as an active substitute for the obsolete A0213X based on maintained compliance with ROHS3 standards and equivalent MSL rating. Both components share identical switch type classification and round pushbutton actuator geometry.

Selection of the LBW6ML-A0 requires mechanical validation due to the panel cutout dimension variance (22.3mm vs. 30mm). Panel mounting interfaces must be assessed for compatibility with the smaller cutout requirement. The illumination feature addition in the LBW6ML-A0 necessitates evaluation of illumination source and lens component requirements, which differ from the non-illuminated A0213X specification.

Frequently Asked Questions (FAQ)

Q: Can the LBW6ML-A0 directly replace the A0213X in existing assemblies?

A: Functional substitution is possible based on matching switch type and actuator configuration. However, the 22.3mm panel cutout dimension of the LBW6ML-A0 differs from the 30mm requirement of the A0213X, requiring mechanical interface modification. The illumination capability addition requires evaluation of illumination source and lens component compatibility.

Q: What are the critical compatibility parameters for substitution?

A: Round pushbutton actuator type, maintained switch operation, ROHS3 compliance, and MSL rating 1 are the primary parameters determining functional equivalence. Panel cutout dimensions and illumination requirements must be evaluated separately for mechanical and electrical integration.

Q: Are both components compliant with current regulatory standards?

A: Both the A0213X and LBW6ML-A0 maintain ROHS3 compliance and MSL rating 1 (Unlimited). The LBW6ML-A0 is currently active in production, while the A0213X is classified as obsolete.

Q: What additional components are required for each part?

A: The A0213X requires contact block(s) and lens assemblies. The LBW6ML-A0 requires contact block(s), illumination source, and lens assemblies. The illumination source requirement represents an additional component dependency for the substitute part.