Weidmüller 995168 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Weidmüller 995168 is a 19-position wire-to-board terminal block with 0.200" (5.08mm) pitch, designed for horizontal mounting with through-hole PCB connection. This component belongs to the Omnimate LP series and is classified as obsolete. Due to its discontinued status, identifying compatible substitute parts is essential for ongoing system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

995168

WeidmüllerIn Stock: 969995168 Datasheet

Current PartRFQ

1330900000

WeidmüllerIn Stock: 10181330900000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 995168 is determined by the following critical parameters:

• Position Count & Pitch: Both main and substitute parts must maintain 19 positions at 0.200" (5.08mm) pitch to ensure PCB footprint compatibility
• Mating Orientation & Mounting: Horizontal with board orientation and through-hole mounting type are mandatory for direct replacement
• Electrical Ratings: Substitute parts must meet or exceed the voltage (300 V) and current (15 A) requirements
• Wire Gauge Compatibility: Acceptable wire gauge ranges must overlap with or encompass the original 12-26 AWG specification
• Termination Method: Wire termination approach may differ if electrical and mechanical compatibility is maintained
• Housing & Contact Materials: Copper alloy tin-plated contacts and polyamide-based housing ensure consistent performance characteristics
• Interlocking Feature: Side interlocking design must be preserved for mechanical stability

The Weidmüller 1330900000 qualifies as a substitute based on these parameters, despite differences in series designation, termination technology, and housing material composition.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1330900000 is the designated substitute for the obsolete 995168 model. Selection rationale is based on the following factors:

Product Status & Availability: The 995168 is classified as obsolete, making the active-status 1330900000 the appropriate long-term solution for new procurements and system continuity.

Electrical Compatibility: The substitute part exceeds the original current rating (20 A vs. 15 A) while maintaining identical voltage specifications (300 V). This provides enhanced electrical capacity without compromising system safety margins.

Mechanical & Dimensional Compatibility: Both parts maintain identical pitch (0.200" / 5.08mm), position count (19), mating orientation (horizontal with board), and mounting type (through-hole), ensuring direct PCB footprint compatibility.

Regulatory Compliance: The 1330900000 carries RoHS compliance certification, whereas the 995168 status is not applicable. Both parts maintain REACH unaffected status and share identical ECCN and HTSUS classifications.

Operational Temperature Range: The substitute part supports an extended operating temperature range (-50°C ~ 120°C) compared to the original (-20°C ~ 100°C), providing greater thermal flexibility for diverse application environments.

Termination Technology Difference: The substitute employs screwless push-in spring termination versus the original screw-clamping design. This represents a functional enhancement in assembly efficiency while maintaining equivalent electrical performance and mechanical security through side interlocking.

Frequently Asked Questions (FAQ)

Q: Can the Weidmüller 1330900000 be used as a direct replacement for the 995168 in existing PCB designs?

A: Yes. Both parts share identical pitch (0.200" / 5.08mm), position count (19), mating orientation, and through-hole mounting specifications. PCB footprints are compatible without modification.

Q: What is the primary difference between the 995168 and 1330900000?

A: The main differences are series designation (Omnimate LP vs. Omnimate LMF), wire termination method (screw-clamping vs. screwless push-in), current rating (15 A vs. 20 A), and product status (obsolete vs. active). Electrical and mechanical core specifications remain equivalent.

Q: Does the wire gauge difference (12-26 AWG vs. 12-24 AWG) affect compatibility?

A: The substitute part accepts 12-24 AWG wire, which overlaps with the original 12-26 AWG range. Wire gauges 12-24 AWG are fully compatible with both parts. Wire gauge 25-26 AWG is supported only by the original 995168; however, the substitute's higher current rating (20 A) accommodates typical applications within this gauge range.

Q: Are there packaging differences between these parts?

A: The 995168 is listed with unspecified packaging, while the 1330900000 is supplied in bulk packaging. Verify packaging requirements with your procurement specifications.

Q: What is the impact of the different housing materials?

A: The 995168 uses Polyamide (PA66) / Nylon 6/6, while the 1330900000 uses Thermoplastic Wemid. Both materials provide equivalent mechanical strength, chemical resistance, and thermal stability for standard industrial terminal block applications. Material selection does not affect electrical performance or PCB compatibility.

Q: Is the screwless termination method as reliable as screw-clamping?

A: Both termination methods are engineered for equivalent electrical and mechanical performance. Screwless push-in spring termination eliminates manual torque application, reducing assembly variability while maintaining consistent contact pressure and connection integrity through the side interlocking feature.

Q: What is the significance of the extended temperature range in the 1330900000?

A: The substitute part operates from -50°C to 120°C versus the original -20°C to 100°C. This extended range provides greater flexibility for applications in extreme thermal environments, though standard industrial applications typically operate within both ranges.

Q: Does RoHS compliance of the 1330900000 affect compatibility with existing systems?

A: RoHS compliance indicates the absence of restricted substances (lead, cadmium, mercury, etc.). This enhances environmental compliance and long-term reliability. The substitute part is fully compatible with systems designed for either RoHS-compliant or non-compliant components.