Weidmüller 995167 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Weidmüller 995167 is an 18-position wire-to-board terminal block with 0.200" (5.08mm) pitch, designed for horizontal mounting with through-hole PCB installation. This component belongs to the Omnimate LP series and is classified as obsolete. Due to its obsolete status, identifying equivalent substitute parts from current product lines is essential for ongoing system maintenance, redesigns, and procurement continuity.

Substiute Parts

995167

WeidmüllerIn Stock: 754995167 Datasheet

Current PartRFQ

1330890000

WeidmüllerIn Stock: 8841330890000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Weidmüller 995167 is based on the following critical parameters that must remain compatible:

• Pitch and Position Count: Both the main part and substitute must maintain 18 positions at 0.200" (5.08mm) pitch to ensure PCB footprint compatibility.
• Mating Orientation and Mounting: Horizontal with board orientation and through-hole mounting are required for mechanical fit.
• Electrical Ratings: Voltage rating of 300 V must be maintained. Current rating may be equal to or exceed the original 15 A specification.
• Wire Gauge Compatibility: The substitute must accept wire gauges within or overlapping the original 12-26 AWG range.
• Interlocking Feature: Side interlocking must be preserved for connector stability.
• Compliance: RoHS compliance status must be maintained.

The Weidmüller 1330890000 qualifies as a substitute based on these parameters. It maintains the same pitch, position count, mating orientation, mounting type, voltage rating, and interlocking feature. The substitute offers enhanced current capacity (20 A vs. 15 A) and an extended operating temperature range, making it suitable for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1330890000 is an active-status substitute for the obsolete 995167 terminal block. Both components maintain RoHS and REACH compliance, ensuring regulatory continuity. The substitute offers improved electrical performance with a 20 A current rating compared to the original 15 A, and an extended operating temperature range of -50°C to 120°C versus -20°C to 100°C.

A key difference is the wire termination method: the 995167 uses screw-based clamping, while the 1330890000 employs screwless push-in spring termination. This represents a functional change that may affect assembly procedures and maintenance protocols. The wire gauge acceptance differs slightly (12-24 AWG for the substitute versus 12-26 AWG for the original), which may impact compatibility with larger gauge conductors.

For applications requiring the original screw-termination design, the 1330890000 may require process adaptation. For new designs or applications where push-in termination is acceptable, the substitute provides enhanced performance and active product support.

Frequently Asked Questions (FAQ)

Q: Can the Weidmüller 1330890000 be used as a direct replacement for the 995167?

A: The 1330890000 maintains mechanical and electrical compatibility in terms of pitch, position count, voltage rating, and mounting type. However, the termination method differs: the 995167 uses screw clamping while the 1330890000 uses screwless push-in springs. This requires evaluation of your assembly and maintenance procedures.

Q: What is the wire gauge limitation when substituting?

A: The original 995167 accepts 12-26 AWG wire. The substitute 1330890000 accepts 12-24 AWG. If your application uses 25 or 26 AWG conductors, the substitute may not accommodate them.

Q: Are there any compliance concerns with this substitution?

A: Both components are RoHS compliant and REACH unaffected, maintaining regulatory compliance across the substitution.

Q: How do the current ratings compare?

A: The 995167 is rated for 15 A, while the 1330890000 is rated for 20 A. The substitute provides higher current capacity, making it suitable for applications at or below the original 15 A specification.

Q: What is the difference in operating temperature ranges?

A: The 995167 operates from -20°C to 100°C. The 1330890000 extends this range to -50°C to 120°C, providing greater thermal flexibility for demanding environments.

Q: Does packaging differ between these parts?

A: The 995167 is listed with no specified packaging, while the 1330890000 is supplied in bulk packaging. Verify packaging requirements for your procurement and assembly processes.