Weidmüller 995152 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Weidmüller 995152 is a 24-position wire-to-board terminal block with 0.200" (5.08mm) pitch, designed for horizontal mounting with through-hole PCB installation. This component operates at 15 A and 300 V, accommodating wire gauges from 12-26 AWG with screw-clamping termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where this series is no longer available.

Substiute Parts

995152

WeidmüllerIn Stock: 705995152 Datasheet

Current PartRFQ

2-1986712-4

TE Connectivity AMP ConnectorsIn Stock: 11232-1986712-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 995152 is determined by the following critical parameters:

• Position Count & Pitch: Must maintain 24 positions at 0.200" (5.08mm) spacing for PCB footprint compatibility
• Mating Orientation: Horizontal with board configuration required for mechanical fit
• Mounting Method: Through-hole installation mandatory for existing PCB designs
• Electrical Ratings: Current and voltage ratings must meet or exceed 15 A and 300 V respectively
• Wire Gauge Compatibility: Must accommodate the 12-26 AWG range or broader
• Interlocking Feature: Side interlocking mechanism must be present for connector security
• Contact Material: Copper alloy with tin plating ensures electrical performance and corrosion resistance

The TE Connectivity AMP Connectors part 2-1986712-4 satisfies all substitution criteria while offering enhanced specifications in current capacity, temperature range, and wire gauge accommodation.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 2-1986712-4 is a direct functional substitute for the obsolete Weidmüller 995152. The substitute part maintains identical mechanical and electrical interface specifications while providing enhanced performance margins across current capacity, temperature range, and wire gauge accommodation.

The substitute part carries active product status with RoHS compliance certification, ensuring long-term availability and regulatory alignment for new designs. The Weidmüller 995152, classified as obsolete, presents supply chain risk for ongoing production requirements.

The transition from screw-clamping termination to screwless push-button clamp technology in the substitute part represents a design improvement that maintains electrical performance while simplifying assembly procedures.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 2-1986712-4 directly replace the Weidmüller 995152 on existing PCBs?

A: Yes. Both parts maintain identical 24-position configuration, 0.200" (5.08mm) pitch, horizontal mating orientation, and through-hole mounting. PCB footprints are compatible without modification.

Q: What are the key differences between these parts?

A: The substitute part offers higher current capacity (16 A vs. 15 A), extended temperature range (-40°C to 110°C vs. -20°C to 100°C), broader wire gauge accommodation (12-30 AWG vs. 12-26 AWG), and screwless termination technology versus screw-clamping. All differences represent performance enhancements or equivalent functionality.

Q: Does the termination method change affect assembly compatibility?

A: The transition from screw-clamping to push-button clamp termination does not affect PCB compatibility. Assembly procedures differ, but the connector footprint and electrical interface remain unchanged.

Q: Is the TE Connectivity part RoHS compliant?

A: Yes. The TE Connectivity 2-1986712-4 carries RoHS compliance certification. The Weidmüller 995152 lists RoHS status as not applicable due to its obsolete classification.

Q: What is the inventory status for these parts?

A: The Weidmüller 995152 has 683 pieces in stock. The TE Connectivity 2-1986712-4 has 1105 pieces in stock, providing greater availability for new orders.