Weidmüller 995145 Terminal Block: Equivalent & Substitute Parts

Part Overview

The Weidmüller 995145 is a 17-position wire-to-board terminal block with 0.200" (5.08mm) pitch, designed for horizontal mounting with through-hole PCB installation. This component operates at 15 A and 300 V with screw-clamping wire termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where this series is no longer available.

Substiute Parts

995145

WeidmüllerIn Stock: 789995145 Datasheet

Current PartRFQ

1330880000

WeidmüllerIn Stock: 7891330880000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Weidmüller 1330880000 qualifies as a functional substitute for the 995145 based on the following critical parameters:

Matching Parameters:

• Identical position count (17 positions)
• Identical pitch specification (0.200" / 5.08mm)
• Identical mating orientation (horizontal with board)
• Identical voltage rating (300 V)
• Identical mounting type (through hole)
• Identical interlocking feature (side entry)
• Identical housing color (orange)
• Identical contact material and plating (copper alloy, tin plated)

Differing Parameters:

• Current rating increased from 15 A to 20 A
• Wire gauge range narrowed from 12-26 AWG to 12-24 AWG
• Wire termination changed from screw-clamping to screwless push-in spring
• Operating temperature range expanded from -20°C ~ 100°C to -50°C ~ 120°C
• Product status changed from obsolete to active
• RoHS compliance upgraded from not applicable to compliant

The substitute part maintains mechanical and electrical compatibility while offering enhanced performance specifications and current product availability.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1330880000 is the designated substitute for the obsolete 995145 based on product lifecycle status and regulatory compliance. The substitute part is currently in active production with RoHS compliance certification, whereas the original part is obsolete and carries no RoHS designation.

For applications currently using the 995145, the 1330880000 provides equivalent mechanical fit and electrical performance within the specified parameters. The increased current rating (20 A versus 15 A) and expanded operating temperature range (-50°C ~ 120°C versus -20°C ~ 100°C) represent performance enhancements suitable for the same application envelope.

The primary design consideration is the termination method change from screw-clamping to screwless push-in spring. This affects assembly procedures and requires evaluation of wire gauge compatibility within the narrower 12-24 AWG range of the substitute part.

Frequently Asked Questions (FAQ)

Q: Can the 1330880000 directly replace the 995145 in existing designs?

A: The 1330880000 maintains identical pitch (5.08mm), position count (17), voltage rating (300 V), and mounting type (through hole). PCB footprints are compatible. The primary design change is the wire termination method: the substitute uses screwless push-in spring termination instead of screw-clamping. Assembly procedures must be updated accordingly.

Q: What is the impact of the wire gauge range difference?

A: The 995145 accepts 12-26 AWG wire, while the 1330880000 accepts 12-24 AWG wire. If your application uses 25 or 26 AWG wire, the substitute part cannot accommodate these gauges. For applications within the 12-24 AWG range, no compatibility issue exists.

Q: Does the increased current rating affect circuit design?

A: The 1330880000 is rated for 20 A compared to the 995145 at 15 A. This represents a performance enhancement and does not restrict use in circuits designed for the original 15 A specification. No circuit redesign is required.

Q: Are there packaging differences between these parts?

A: The 995145 is listed with no specified packaging designation, while the 1330880000 is supplied in bulk packaging. Verify bulk packaging specifications with your supplier for procurement requirements.

Q: What is the significance of the RoHS compliance difference?

A: The 995145 carries "not applicable" RoHS status as an obsolete part. The 1330880000 is RoHS compliant, meeting current regulatory requirements for new designs and systems subject to RoHS directives. Both parts maintain REACH unaffected status.