Weidmüller 995035 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Weidmüller 995035 is a 16-position wire-to-board terminal block with 5mm pitch, designed for horizontal mounting through PCB holes. This component belongs to the Omnimate LP series and is classified as obsolete. Due to its discontinued status, identifying functionally equivalent substitute parts is essential for ongoing system maintenance, repair, and new design implementations where this connector type is required.

Substiute Parts

995035

WeidmüllerIn Stock: 1015995035 Datasheet

Current PartRFQ

1935307

Phoenix ContactIn Stock: 11181935307 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 995035 is determined by the following critical parameters:

• Position Count & Pitch: Must be 16 positions at 0.197" (5.00mm) pitch to maintain PCB layout compatibility
• Mating Orientation & Mounting: Must be horizontal with board orientation and through-hole mounting type
• Electrical Ratings: Current rating must meet or exceed 15 A; voltage rating must be 300 V or higher
• Wire Gauge Compatibility: Must accept 12-26 AWG wire range
• Termination Method: Screw-based termination is required for mechanical compatibility
• Environmental Range: Operating temperature range must encompass or exceed -20°C ~ 100°C

The Phoenix Contact 1935307 meets all substitution criteria within these parameters.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1935307 is a direct functional substitute for the Weidmüller 995035 based on the following engineering criteria:

Electrical Compatibility: The 1935307 maintains identical voltage (300 V) and wire gauge (12-26 AWG) specifications. Its current rating of 18 A exceeds the original 15 A requirement, providing additional margin for circuit protection and thermal management.

Mechanical Compatibility: Both components share identical pitch (5.00mm), position count (16), mating orientation (horizontal with board), and through-hole mounting configuration. PCB footprints are compatible without layout modification.

Termination Compatibility: Both use screw-based wire termination, ensuring compatibility with existing assembly processes and tooling.

Compliance Status: The 1935307 is ROHS3 compliant and REACH affected, meeting current regulatory requirements. The original 995035 carries obsolete status with non-applicable compliance designations, making the substitute the appropriate choice for new designs and long-term supply continuity.

Production Availability: The 1935307 is active production status with confirmed inventory (1085 pcs), whereas the 995035 is obsolete with limited remaining stock (965 pcs).

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1935307 be used as a direct replacement in existing assemblies using the Weidmüller 995035?

A: Yes. The 1935307 is mechanically and electrically compatible. Identical pitch, position count, and through-hole mounting ensure PCB compatibility without modification. Screw-based termination is compatible with existing assembly processes.

Q: What is the difference in screw torque specifications between these parts?

A: The Weidmüller 995035 specifies 0.5-0.6 Nm (M3 screw), while the Phoenix Contact 1935307 specifies 0.35-0.4 Nm (M2.6 screw). Different screw sizes reflect design variations between manufacturers. Assembly personnel must apply torque values specific to the selected component to avoid over-tightening or under-clamping.

Q: Are there any color or housing material differences that affect functionality?

A: The 995035 uses black polyamide (PA66) housing, while the 1935307 uses green polyamide (PA) housing. These are cosmetic and material grade differences that do not affect electrical performance or mechanical compatibility. Housing material composition is functionally equivalent for this application.

Q: What is the operating temperature range for the substitute part?

A: The Phoenix Contact 1935307 does not specify an operating temperature range in the provided data. The original Weidmüller 995035 operates from -20°C to 100°C. For applications requiring confirmed temperature specifications, contact the manufacturer directly.

Q: Is the Phoenix Contact 1935307 suitable for new product designs?

A: Yes. The 1935307 is active production status with ROHS3 compliance and REACH compliance documentation. It is the appropriate choice for new designs requiring this connector type and pitch configuration.

Q: What packaging format is available for the Phoenix Contact 1935307?

A: The 1935307 is supplied in bulk packaging, as opposed to the original part's unspecified packaging format. Confirm bulk packaging meets procurement and assembly requirements for your application.