Weidmüller 995024 Terminal Block: Equivalent & Substitute Parts

Part Overview

The Weidmüller 995024 is a 5-position wire-to-board terminal block with 5mm pitch, designed for horizontal mounting through PCB holes. This component features side-entry interlocking, screw-clamping wire termination, and operates across -20°C to 100°C. The part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications requiring compatible 5-position, 5mm pitch terminal block solutions.

Substiute Parts

995024

WeidmüllerIn Stock: 1011995024 Datasheet

Current PartRFQ

EM258505V

Eaton - Electronics DivisionIn Stock: 1455EM258505V Datasheet

SimilarRFQ

VI0501550000G

Amphenol AnytekIn Stock: 4799VI0501550000G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 995024 is determined by the following mandatory parameters:

• Positions Per Level: Must be 5
• Pitch: Must be 0.197" (5.00mm)
• Mating Orientation: Must be Horizontal with Board
• Mounting Type: Must be Through Hole
• Voltage Rating: Must be ≥300 V
• Current Rating: Must be ≥15 A
• Wire Gauge Compatibility: Must accommodate 12-26 AWG minimum
• Screw Thread: Must be M3
• Features: Must include Side Interlocking

Both identified substitutes meet these criteria. The Eaton EM258505V and Amphenol Anytek VI0501550000G are functionally equivalent alternatives that satisfy all core electrical and mechanical requirements for direct replacement in applications using the Weidmüller 995024.

Parameter Comparison

Engineering Selection Recommendations

Eaton EM258505V is suitable for applications requiring active product support and ROHS3 compliance. This substitute provides equivalent electrical performance with a higher current rating (16 A vs. 15 A) and extended operating temperature range (-40°C to 105°C). The rising cage clamp termination differs from the original clamping yoke design but maintains M3 screw compatibility and 5mm pitch spacing.

Amphenol Anytek VI0501550000G offers the widest operating temperature range (-40°C to 115°C) and highest inventory availability. This substitute accommodates wire gauges up to 28 AWG, exceeding the original 26 AWG specification. ROHS3 compliance and active product status support long-term supply chain continuity. The lower screw torque specification (0.4 Nm) requires attention during assembly to prevent over-tightening.

Both substitutes maintain the core functional requirements: 5-position configuration, 5mm pitch, horizontal through-hole mounting, 300 V voltage rating, M3 screw thread, and side interlocking features. Selection between these options depends on specific application requirements regarding temperature range, wire gauge capacity, and assembly torque specifications.

Frequently Asked Questions (FAQ)

Q: Can the Eaton EM258505V or Amphenol Anytek VI0501550000G be used as direct replacements for the Weidmüller 995024?

A: Yes. Both substitutes meet all mandatory electrical and mechanical parameters: 5 positions, 5mm pitch, 300 V voltage rating, ≥15 A current capacity, M3 screw thread, horizontal through-hole mounting, and side interlocking. PCB hole spacing and connector footprints are compatible.

Q: What are the differences in wire termination between the original and substitute parts?

A: The Weidmüller 995024 uses a clamping yoke with tension sleeve design. Both substitutes employ rising cage clamp termination. Both methods secure 12-26 AWG wire (Amphenol supports up to 28 AWG) using M3 screws. Assembly procedures may differ; consult manufacturer documentation for specific torque and insertion techniques.

Q: Are there temperature range considerations when selecting a substitute?

A: The Weidmüller 995024 operates from -20°C to 100°C. The Eaton EM258505V extends this to -40°C to 105°C, and the Amphenol Anytek VI0501550000G to -40°C to 115°C. For applications within the original -20°C to 100°C range, all three parts are suitable. For extended temperature requirements, the Amphenol option provides the widest margin.

Q: What screw torque specifications apply to each part?

A: Weidmüller 995024 specifies 0.5-0.6 Nm (4.4-5.3 Lb-In). Eaton EM258505V requires 0.79 Nm (7.0 Lb-In). Amphenol Anytek VI0501550000G requires 0.4 Nm (4.6 Lb-In). Assembly equipment and procedures must be adjusted accordingly to prevent wire damage or insufficient clamping force.

Q: Do the substitutes support the same wire gauge range?

A: The Weidmüller 995024 and Eaton EM258505V both support 12-26 AWG. The Amphenol Anytek VI0501550000G supports 12-28 AWG, providing additional flexibility for smaller gauge conductors.

Q: Are compliance certifications equivalent across all three parts?

A: The Weidmüller 995024 RoHS status is not applicable. Both the Eaton EM258505V and Amphenol Anytek VI0501550000G are ROHS3 compliant. All three parts are REACH unaffected and classified as EAR99 for export control purposes.