Amphenol ICC 98414-F08-06LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 98414-F08-06LF is a rectangular connector header for through-hole mounting with 6 positions arranged in 2 rows at 2.00mm pitch. This shrouded male pin header is designed for board-to-board or cable connections with solder termination and latch holder fastening. The part is classified as obsolete, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

98414-F08-06LF

Amphenol ICC (FCI)In Stock: 95698414-F08-06LF Datasheet

Current PartRFQ

98414-G06-06LF

Amphenol ICC (FCI)In Stock: 8397998414-G06-06LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The 98414-G06-06LF qualifies as a direct substitute for the 98414-F08-06LF based on the following critical parameters:

• Identical connector type, contact type, and mating pitch (2.00mm)
• Matching position count (6 positions in 2 rows) and row spacing
• Identical shrouding configuration (Shrouded - 4 Wall)
• Matching mounting type (Through Hole) and termination method (Solder)
• Equivalent electrical ratings: 2A (AC/DC) and 200V (AC/DC)
• Identical material flammability rating (UL94 V-0)
• Same series family (Minitek®)

The primary distinction is product status: the substitute part is active and widely available, whereas the original part is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The 98414-G06-06LF is the direct active equivalent for the obsolete 98414-F08-06LF. Selection of the substitute part is based on:

• Functional equivalence across all critical electrical and mechanical parameters
• Active product status with established supply chain availability
• RoHS compliance and REACH unaffected status of the substitute part
• Identical UL94 V-0 flammability certification
• Maintained electrical performance specifications (2A, 200V)

Minor dimensional variations exist in contact post length (0.122" vs. 0.098") and insulation height (0.220" vs. 0.232"), which do not affect functional compatibility in standard board-to-board applications. Contact finish thickness on the mating surface differs (Flash vs. 30.0µin), both meeting gold plating requirements for the Minitek® series.

Frequently Asked Questions (FAQ)

Q: Can the 98414-G06-06LF directly replace the 98414-F08-06LF in existing designs?

A: Yes. Both parts share identical mating pitch (2.00mm), position count (6 in 2 rows), shrouding configuration, and electrical ratings (2A, 200V). The substitute part maintains functional compatibility for board-to-board and cable connection applications.

Q: What is the significance of the product status difference?

A: The original part is classified as obsolete, indicating discontinued manufacturing and limited availability. The substitute part is active, ensuring reliable procurement for new production and design revisions.

Q: Are there compliance differences between the two parts?

A: The substitute part includes RoHS compliance and REACH unaffected status documentation. Both parts maintain UL94 V-0 flammability certification and identical moisture sensitivity level (MSL 1).

Q: Do the dimensional differences in contact post length affect compatibility?

A: No. The contact post length variation (0.122" to 0.098") does not impact mating performance or board-level compatibility. Both dimensions are within acceptable tolerances for the Minitek® 2.00mm series.

Q: What packaging format is available for the substitute part?

A: The 98414-G06-06LF is supplied in bag packaging with significantly higher inventory availability (83,915 pieces) compared to the obsolete part.