TE Connectivity AMP Connectors 965908-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 965908-2 is a rectangular connector pin contact designed for the Micro Quadlok series. This component is a stamped pin contact with gold finish, rated for 18-20 AWG wire gauges, and utilizes crimp termination. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and support ongoing production requirements.

Substiute Parts

965908-2

TE Connectivity AMP ConnectorsIn Stock: 824965908-2 Datasheet

Current PartRFQ

5-965908-2

TE Connectivity AMP ConnectorsIn Stock: 97405-965908-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 965908-2 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: TE Connectivity AMP Connectors
• Series: Micro Quadlok
• Wire Gauge: 18-20 AWG
• Contact Termination: Crimp
• Type: Stamped
• Base Product Number: 965908

Allowable Variations:

• Pin or Socket configuration (Pin vs. Tab)
• Contact Finish (Gold vs. Tin)
• Product Status (Obsolete vs. Active)
• Packaging format

The substitute part 5-965908-2 maintains compatibility within the Micro Quadlok connector system through shared base product designation, identical wire gauge rating, and equivalent crimp termination methodology. The transition from pin to tab contact and gold to tin finish represents a functional substitution within the same connector family architecture.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 5-965908-2

The part 5-965908-2 is the designated active equivalent for the obsolete 965908-2. Both components share the same base product number (965908), series designation (Micro Quadlok), wire gauge specification (18-20 AWG), and crimp termination method. The substitute maintains identical electrical and mechanical compatibility within the Micro Quadlok connector architecture.

The transition from gold to tin contact finish and from pin to tab configuration represents a standard substitution path within the TE Connectivity AMP Connectors product line. The substitute part carries active product status with confirmed inventory availability (9725 pieces), ensuring supply chain reliability for ongoing applications.

Both parts comply with export control classification EAR99 and share identical HTSUS commodity codes, confirming regulatory equivalence for procurement and logistics purposes.

Frequently Asked Questions (FAQ)

Q: Can 5-965908-2 directly replace 965908-2 in existing assemblies?

A: The 5-965908-2 is functionally equivalent within the Micro Quadlok series. Both parts maintain identical wire gauge (18-20 AWG), crimp termination, and stamped construction. The contact finish change from gold to tin and the pin-to-tab configuration change are standard variations within this connector family. Assembly compatibility depends on the specific connector housing and mating configuration used in the application.

Q: What is the difference between the pin and tab contact configurations?

A: The 965908-2 features a pin contact, while the 5-965908-2 features a tab contact. Both are stamped contacts designed for crimp termination with 18-20 AWG wire. The contact geometry difference accommodates different mating connector designs within the Micro Quadlok series.

Q: Why is the contact finish different between these parts?

A: The 965908-2 uses gold finish, while the 5-965908-2 uses tin finish. Both finishes are standard for TE Connectivity AMP Connectors rectangular connector contacts. The finish selection depends on application requirements for corrosion resistance and electrical performance. Tin finish is widely used in industrial and commercial applications.

Q: What is the packaging difference?

A: The 965908-2 packaging is not specified in available data. The 5-965908-2 is supplied in Cut Tape (CT) packaging format, which is standard for high-volume component distribution and automated assembly processes.

Q: Are both parts RoHS compliant?

A: The 965908-2 is confirmed ROHS3 compliant. RoHS compliance status for the 5-965908-2 is not specified in the provided data. Both parts carry identical ECCN and HTSUS classifications, indicating regulatory equivalence for export and procurement purposes.

Q: What is the inventory status for these parts?

A: The 965908-2 is obsolete with 743 pieces available as new original stock. The 5-965908-2 is active product with 9725 pieces available as new original stock, providing superior supply chain availability for new designs and ongoing production.