TE Connectivity 965908-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 965908-1 is a pin contact for rectangular connectors in the Micro Quadlok series. This component is a stamped tin-plated crimp contact designed for 18-20 AWG wire gauges. The part is classified as obsolete, making identification of active equivalent components essential for ongoing procurement and system maintenance. Substitute parts must maintain identical electrical and mechanical specifications to ensure proper connector assembly and performance.

Substiute Parts

965908-1

TE Connectivity AMP ConnectorsIn Stock: 990965908-1 Datasheet

Current PartRFQ

5-965908-1

TE Connectivity AMP ConnectorsIn Stock: 1048595-965908-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 965908-1 is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part must satisfy the following criteria:

• Identical series classification (Micro Quadlok)
• Identical contact type (Stamped pin)
• Identical termination method (Crimp)
• Identical wire gauge range (18-20 AWG)
• Identical contact finish (Tin)
• Identical RoHS compliance status (ROHS3 Compliant)
• Identical moisture sensitivity level (MSL 1)
• Same manufacturer (TE Connectivity AMP Connectors)

The substitute part 5-965908-1 meets all these requirements and represents the active production equivalent of the obsolete 965908-1.

Parameter Comparison

Engineering Selection Recommendations

The part 5-965908-1 is the direct equivalent substitute for the obsolete 965908-1. Both components share identical electrical and mechanical specifications, including wire gauge, contact finish, termination method, and series classification. The primary distinction is product status: 965908-1 is obsolete while 5-965908-1 is active production.

Selection of 5-965908-1 is appropriate for all applications previously using 965908-1. Both parts maintain ROHS3 compliance and identical moisture sensitivity ratings. The substitute part is available in Cut Tape packaging, which differs from the unspecified packaging of the original part but does not affect functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can 5-965908-1 be used as a direct replacement for 965908-1?

A: Yes. Both parts are identical in all critical specifications: wire gauge (18-20 AWG), contact finish (tin), termination method (crimp), series (Micro Quadlok), and compliance ratings (ROHS3, MSL 1). The substitute is the active production equivalent.

Q: What is the difference between 965908-1 and 5-965908-1?

A: The parts are electrically and mechanically equivalent. The primary difference is product status: 965908-1 is obsolete, while 5-965908-1 is active. The substitute part is available in Cut Tape packaging.

Q: Are there any compatibility concerns when switching from 965908-1 to 5-965908-1?

A: No compatibility concerns exist. Both parts are designed for the same Micro Quadlok connector series and accept identical wire gauges through the same crimp termination process.

Q: Does the packaging difference affect component performance?

A: No. Cut Tape packaging is a distribution format and does not affect the electrical or mechanical performance of the contact itself.

Q: Are both parts RoHS compliant?

A: Yes. Both 965908-1 and 5-965908-1 are ROHS3 compliant and suitable for applications requiring RoHS certification.

Q: What wire gauges are supported by these contacts?

A: Both parts support 18-20 AWG wire gauges for crimp termination.