TE Connectivity 965906-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 965906-5 is a socket contact for rectangular connectors in the Micro Quadlok series. This component is designed for crimp termination with 18-20 AWG wire gauges and features gold plating for enhanced conductivity and corrosion resistance. The part is classified as obsolete, making identification of active equivalent alternatives essential for ongoing procurement and system maintenance. Substitute parts must maintain compatibility across wire gauge specifications, contact termination method, and connector series designation.

Substiute Parts

965906-5

TE Connectivity AMP ConnectorsIn Stock: 837965906-5 Datasheet

Current PartRFQ

5-965906-5

TE Connectivity AMP ConnectorsIn Stock: 1193425-965906-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 965906-5 is determined by the following critical parameters:

Wire Gauge Compatibility: The main part accommodates 18-20 AWG wire. Substitute parts must support wire gauges within this range or a subset thereof.

Contact Termination Method: Both the main part and substitutes utilize crimp termination, ensuring mechanical and electrical compatibility in assembly processes.

Connector Series: All parts must belong to the Micro Quadlok series to ensure physical and electrical interchangeability within connector housings.

Contact Type: Socket contacts are required to maintain functional equivalence in mating applications.

Contact Finish: Gold plating is specified for both the main part and substitutes to ensure consistent electrical performance and environmental resistance.

Regulatory Compliance: Parts must maintain ROHS3 compliance and equivalent moisture sensitivity ratings to ensure suitability for the same applications and environments.

The substitute part 5-965906-5 meets these criteria while offering active product status and expanded inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5-965906-5 is suitable for applications currently specified with 965906-5 where wire gauge requirements are limited to 20 AWG. Both parts share identical manufacturer origin, connector series, contact termination method, and regulatory compliance status.

The primary distinction between the main part and substitute is wire gauge specification. The main part 965906-5 supports 18-20 AWG, while the substitute 5-965906-5 is specified for 20 AWG only. Selection of the substitute part is appropriate for applications where 20 AWG wire is the design requirement or where 20 AWG falls within the acceptable wire gauge range of the original specification.

The substitute part offers the advantage of active product status, ensuring long-term availability and supply chain continuity. Both parts maintain identical RoHS3 compliance, moisture sensitivity ratings, and export classification codes, confirming suitability for equivalent regulatory and environmental contexts.

Frequently Asked Questions (FAQ)

Q: Can 5-965906-5 be used as a direct replacement for 965906-5 in all applications?

A: The substitute part 5-965906-5 is compatible with applications specified for 20 AWG wire. If the original application requires support for 18 AWG wire, the substitute part is not suitable. Verify wire gauge requirements in the system design specification before substitution.

Q: What is the difference between the two part numbers?

A: Both parts are socket contacts in the Micro Quadlok series with crimp termination and gold plating. The main part 965906-5 supports 18-20 AWG wire, while the substitute 5-965906-5 is specified for 20 AWG wire only. The substitute part is currently active in production, whereas the main part is obsolete.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, carry identical moisture sensitivity ratings (MSL 1), and share the same ECCN and HTSUS classifications. They are suitable for equivalent regulatory and environmental applications.

Q: What does the packaging designation "Cut Tape (CT)" mean for the substitute part?

A: Cut Tape packaging indicates the parts are supplied on continuous tape that has been cut to specific lengths for distribution. This packaging format is standard for component procurement and does not affect the electrical or mechanical properties of the contact itself.

Q: Why is the main part listed as obsolete?

A: Product obsolescence indicates that the manufacturer has discontinued active production of part 965906-5. The substitute part 5-965906-5 represents the active equivalent in the product line, ensuring continued availability for new designs and system maintenance.

Q: Can I use 5-965906-5 for 18 AWG applications?

A: The substitute part 5-965906-5 is specified for 20 AWG wire. Use of this part with 18 AWG wire falls outside the manufacturer's specified wire gauge range and is not recommended for applications requiring 18 AWG compatibility.