TE Connectivity 963716-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 963716-1 is a pin contact for rectangular connectors in the Micro Quadlok series. This component is designed for crimp termination with 18-20 AWG wire gauges and features a tin contact finish. The part is classified as obsolete, making identification of active equivalent components necessary for ongoing procurement and design continuity. Substitute parts must maintain identical electrical and mechanical specifications to ensure proper connector assembly and performance.

Substiute Parts

963716-1

TE Connectivity AMP ConnectorsIn Stock: 771963716-1 Datasheet

Current PartRFQ

5-963716-1

TE Connectivity AMP ConnectorsIn Stock: 1404645-963716-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 963716-1 is determined by strict equivalence across the following critical parameters:

• Series Compatibility: Both parts must belong to the Micro Quadlok series
• Contact Type: Pin configuration required
• Termination Method: Crimp termination only
• Wire Gauge Range: 18-20 AWG specification
• Contact Finish: Tin plating
• Electrical Classification: Rectangular connector category
• Compliance Standards: RoHS compliance and MSL rating

The substitute part 5-963716-1 satisfies all these criteria while offering the advantage of active product status and significantly higher inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5-963716-1 is a direct functional equivalent to the obsolete 963716-1. Both components share identical electrical and mechanical specifications within the Micro Quadlok series, including pin configuration, crimp termination, 18-20 AWG wire gauge compatibility, and tin contact finish.

The primary distinction between these parts is product lifecycle status. The main part 963716-1 is classified as obsolete, while the substitute 5-963716-1 maintains active product status. Both parts meet RoHS compliance requirements and carry MSL rating 1 (Unlimited), indicating equivalent environmental handling and storage conditions.

The substitute part is available in Cut Tape packaging with substantially higher inventory levels (140400 units versus 754 units), supporting both immediate procurement needs and long-term supply chain planning. Selection of the active substitute part 5-963716-1 is appropriate for new designs, production continuity, and component replenishment.

Frequently Asked Questions (FAQ)

Q: Can 5-963716-1 be used as a direct replacement for 963716-1 in existing assemblies?

A: Yes. Both parts are pin contacts within the Micro Quadlok series with identical crimp termination, 18-20 AWG wire gauge, and tin contact finish. They are mechanically and electrically interchangeable.

Q: What is the significance of the product status difference between these parts?

A: The main part 963716-1 is obsolete, indicating it is no longer manufactured or supported by TE Connectivity. The substitute 5-963716-1 is active, meaning it is currently produced and available for procurement. Active status ensures ongoing supply chain support and manufacturing consistency.

Q: Are there packaging differences between these parts?

A: The substitute part 5-963716-1 is specified as Cut Tape (CT) packaging. The main part 963716-1 does not have packaging information provided. Cut Tape packaging is standard for component distribution and is compatible with automated assembly processes.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS compliant and carry identical Moisture Sensitivity Level 1 (Unlimited) ratings. The main part specifies ROHS3 compliance, while the substitute specifies RoHS compliance. Both meet current environmental and regulatory requirements for rectangular connector components.

Q: What wire gauges are supported by these pin contacts?

A: Both parts support 18-20 AWG wire gauges for crimp termination. This range accommodates standard industrial and commercial wiring applications within the Micro Quadlok connector system.

Q: Is the substitute part suitable for new product designs?

A: Yes. The substitute part 5-963716-1 is active and fully specified. It is appropriate for new designs, production builds, and component replenishment where Micro Quadlok series pin contacts with 18-20 AWG crimp termination are required.