TE Connectivity AMP Connectors 963715-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 963715-5 is a socket contact for rectangular connectors in the Micro Quadlok series. This component is designed for 18-20 AWG wire applications with gold-plated crimp termination. The part is classified as obsolete, which necessitates identification of active equivalent alternatives to maintain supply chain continuity and support ongoing production requirements.

Substiute Parts

963715-5

TE Connectivity AMP ConnectorsIn Stock: 919963715-5 Datasheet

Current PartRFQ

5-963715-5

TE Connectivity AMP ConnectorsIn Stock: 957475-963715-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connector socket contacts is determined by strict equivalence across the following parameters:

• Series Compatibility: Both parts must belong to the Micro Quadlok series
• Contact Type: Socket configuration required
• Termination Method: Crimp termination only
• Wire Gauge Range: 18-20 AWG specification
• Contact Finish: Gold plating required
• Manufacturing Process: Stamped construction
• Compliance Standards: ROHS3 compliance and MSL rating

The substitute part 5-963715-5 satisfies all these criteria and is derived from the same base product number (963715), confirming functional and mechanical equivalence.

Parameter Comparison

Engineering Selection Recommendations

The part 5-963715-5 is the direct active equivalent for the obsolete 963715-5. Both components share identical electrical and mechanical specifications, including wire gauge compatibility, contact finish, termination method, and series designation. The substitute part maintains full ROHS3 compliance and identical moisture sensitivity rating.

The primary distinction is product status: 963715-5 is obsolete with limited remaining inventory (843 pieces), while 5-963715-5 is active with substantially higher availability (95,709 pieces). The substitute part is packaged in Cut Tape format, which is standard for production environments.

For new designs and ongoing production, 5-963715-5 is the appropriate selection. For legacy system maintenance where original packaging specifications are critical, compatibility with Cut Tape packaging must be confirmed against existing assembly procedures.

Frequently Asked Questions (FAQ)

Q: Can 5-963715-5 be used as a direct replacement for 963715-5 in existing assemblies?

A: Yes. Both parts are socket contacts in the Micro Quadlok series with identical specifications for wire gauge (18-20 AWG), contact finish (gold), termination method (crimp), and manufacturing process (stamped). Electrical and mechanical compatibility is complete.

Q: What is the difference between the two part numbers?

A: The primary difference is product status and packaging. The 963715-5 is obsolete, while 5-963715-5 is active. The substitute part is supplied in Cut Tape packaging. The base product number (963715) is identical for both, indicating they are variants of the same contact design.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant with MSL rating of 1 (Unlimited). ECCN and HTSUS classifications are identical.

Q: Why should I transition from 963715-5 to 5-963715-5?

A: The 963715-5 is classified as obsolete with finite inventory. The 5-963715-5 is an active product with significantly higher stock levels, ensuring long-term supply chain reliability and supporting production continuity.

Q: Is the Cut Tape packaging of 5-963715-5 compatible with automated assembly equipment?

A: Cut Tape packaging is standard for automated pick-and-place assembly systems. Compatibility depends on your specific equipment specifications and feeder configurations. Verify packaging format against your assembly process requirements.

Q: Can these parts be intermixed in the same connector assembly?

A: Yes. Since both parts are identical socket contacts from the same series with matching specifications, they can be used interchangeably within the same connector assembly without functional impact.