3M 963210-2000-AR-PR Equivalent & Substitute Parts

Part Overview

The 3M 963210-2000-AR-PR is a 10-position rectangular receptacle connector with 0.100" (2.54mm) pitch, designed for surface mount board-to-board applications. This connector features gold-plated mating contacts, push-pull fastening, and operates across -25°C to 105°C. The product is classified as obsolete, making identification of functionally equivalent active alternatives essential for ongoing production and maintenance applications.

Substiute Parts

963210-2000-AR-PR

3MIn Stock: 949963210-2000-AR-PR Datasheet

Current PartRFQ

5-147105-5

TE Connectivity AMP ConnectorsIn Stock: 22185-147105-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3M 963210-2000-AR-PR is based on the following critical parameters that must remain constant:

• Connector configuration: 10-position receptacle with female socket contacts
• Pitch and spacing: 0.100" (2.54mm) mating pitch and row spacing
• Mounting method: Surface mount with solder termination
• Fastening mechanism: Push-pull engagement
• Contact finish: Gold-plated mating surface
• Electrical ratings: 2A current capacity and 1000VDC voltage rating
• Environmental compliance: UL94 V-0 flammability rating and MSL 1 classification

The TE Connectivity AMP Connectors 5-147105-5 satisfies all critical substitution criteria. Both connectors maintain identical mechanical interfaces, electrical performance specifications, and environmental ratings required for direct replacement in board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5-147105-5 is the designated manufacturer-recommended substitute for the obsolete 3M 963210-2000-AR-PR. Selection of this alternative is supported by:

• Product availability: The substitute maintains active production status with 2200 units in stock, compared to the obsolete main part with limited remaining inventory
• Compliance alignment: Both connectors carry UL94 V-0 flammability certification and MSL 1 moisture sensitivity classification
• Regulatory status: The substitute is ROHS3 compliant and REACH unaffected, meeting current environmental regulations
• Electrical and mechanical equivalence: Identical pitch, row spacing, contact configuration, current rating, and fastening mechanism ensure direct functional replacement

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5-147105-5 directly replace the 3M 963210-2000-AR-PR in existing designs?

A: Yes. Both connectors share identical mating pitch (0.100"), row spacing (0.100"), number of positions (10), contact type (female socket), mounting method (surface mount), and fastening mechanism (push-pull). The mechanical and electrical interfaces are equivalent.

Q: What are the key differences between these two connectors?

A: The primary differences are product status (obsolete versus active), insulation material composition (thermoplastic versus polyester glass-filled), contact material (copper alloy versus phosphor bronze), and operating temperature range (-25°C to 105°C versus -65°C to 125°C). The substitute offers an extended temperature range and improved material specifications.

Q: Are there packaging considerations when switching to the substitute part?

A: Both connectors are supplied in cut tape (CT) packaging and feature pick-and-place compatibility for automated assembly. No packaging format changes are required.

Q: Does the substitute part maintain the same voltage rating?

A: The main part specifies 1000VDC. The substitute part does not list a voltage rating in the provided specifications. Electrical performance validation against application requirements is necessary before final design approval.

Q: What is the moisture sensitivity level for both connectors?

A: Both connectors carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.