3M 960122-8100-AR-TP Equivalent & Substitute Parts

Part Overview

The 3M 960122-8100-AR-TP is a 22-position rectangular receptacle connector with 0.100" (2.54mm) pitch, surface mount right-angle configuration, and gold-plated mating contacts. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. The part operates across -25°C to 105°C with a 2A current rating per contact and 1000VDC voltage rating.

Substiute Parts

960122-8100-AR-TP

3MIn Stock: 1214960122-8100-AR-TP Datasheet

Current PartRFQ

SSM-122-F-SH

Samtec Inc.In Stock: 1113SSM-122-F-SH Datasheet

MFR RecommendedRFQ

SSM-122-FM-SH

Samtec Inc.In Stock: 885SSM-122-FM-SH Datasheet

MFR RecommendedRFQ

SSM-122-L-SH-TR

Samtec Inc.In Stock: 1046SSM-122-L-SH-TR Datasheet

MFR RecommendedRFQ

SSM-122-LM-SH

Samtec Inc.In Stock: 903SSM-122-LM-SH Datasheet

MFR RecommendedRFQ

SSM-122-S-SH-019

Samtec Inc.In Stock: 700SSM-122-S-SH-019 Datasheet

MFR RecommendedRFQ

SSM-122-SM-SH

Samtec Inc.In Stock: 1130SSM-122-SM-SH Datasheet

MFR RecommendedRFQ

SSM-122-T-SH

Samtec Inc.In Stock: 912SSM-122-T-SH Datasheet

MFR RecommendedRFQ

SSM-122-TM-SH

Samtec Inc.In Stock: 873SSM-122-TM-SH Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are qualified based on the following critical parameters that must match or exceed the original specification:

• Connector Type & Style: Receptacle, board-to-board or cable compatible
• Position Count & Pitch: 22 positions at 0.100" (2.54mm) mating pitch
• Mounting Configuration: Surface mount, right-angle orientation
• Electrical Performance: Current and voltage ratings must support the application
• Contact Material & Finish: Gold or tin mating contact finish
• Insulation Material: Thermoplastic or equivalent polymer
• Termination Method: Solder termination
• Fastening Type: Push-pull mechanism

All Samtec Tiger Claw™ SSM series substitutes meet these core requirements. Variations in contact finish thickness, insulation height tolerance, and operating temperature range represent design improvements over the obsolete 3M part.

Parameter Comparison

Engineering Selection Recommendations

All Samtec Tiger Claw™ SSM series parts listed are active production components with ROHS3 compliance, providing superior long-term availability compared to the obsolete 3M 960122-8100-AR-TP. Selection among substitute options depends on application-specific requirements:

Gold-Plated Contact Finish Options: SSM-122-F-SH, SSM-122-FM-SH, SSM-122-L-SH-TR, SSM-122-LM-SH, SSM-122-S-SH-019, and SSM-122-SM-SH maintain gold mating contact finish for applications requiring corrosion resistance and low contact resistance. Contact finish thickness varies from 3.00µin to 30.0µin.

Tin-Plated Contact Finish Options: SSM-122-T-SH and SSM-122-TM-SH provide tin mating contact finish for cost-optimized applications where gold plating is not required.

Packaging Consideration: SSM-122-L-SH-TR is supplied in tape and reel (TR) packaging for high-volume automated assembly. All other variants are supplied in standard packaging.

Position Loading: SSM-122-S-SH-019 is loaded with 21 positions instead of 22. This variant is suitable only for applications where the 22nd position is not utilized.

All substitute parts exceed the original 2A current rating at 5.2A per contact and provide extended operating temperature range (-55°C to 125°C versus -25°C to 105°C), supporting broader application environments.

Frequently Asked Questions (FAQ)

Q: Can SSM-122 series connectors directly replace the 3M 960122-8100-AR-TP?

A: Yes. Both maintain identical 22-position, 0.100" (2.54mm) pitch, surface mount right-angle configuration with push-pull fastening. Mechanical and electrical interfaces are compatible. The SSM series provides improved current rating (5.2A versus 2A) and extended temperature range.

Q: What is the difference between gold and tin contact finish options?

A: Gold-plated contacts (SSM-122-F-SH, SSM-122-FM-SH, SSM-122-L-SH-TR, SSM-122-LM-SH, SSM-122-S-SH-019, SSM-122-SM-SH) provide superior corrosion resistance and lower contact resistance, suitable for high-reliability applications. Tin-plated contacts (SSM-122-T-SH, SSM-122-TM-SH) are cost-optimized for general-purpose applications where corrosion resistance is not critical.

Q: Why do some part numbers include "M" in the designation?

A: The "M" suffix indicates a mated pair configuration. Parts designated with "M" (SSM-122-FM-SH, SSM-122-LM-SH, SSM-122-SM-SH, SSM-122-TM-SH) are supplied as matched connector sets. Non-"M" variants are individual receptacles.

Q: What does the "TR" suffix mean in SSM-122-L-SH-TR?

A: TR indicates tape and reel packaging, standard for high-volume surface mount assembly operations. This variant is identical electrically and mechanically to SSM-122-L-SH but supplied in automated handling format.

Q: Is SSM-122-S-SH-019 a full substitute for the 3M part?

A: SSM-122-S-SH-019 is loaded with 21 positions instead of 22. It is suitable only for applications where all 22 positions are not required. For full 22-position replacement, use SSM-122-F-SH, SSM-122-FM-SH, SSM-122-L-SH-TR, SSM-122-LM-SH, SSM-122-SM-SH, SSM-122-T-SH, or SSM-122-TM-SH.

Q: Are all substitute parts RoHS compliant?

A: Yes. All Samtec Tiger Claw™ SSM series substitutes are ROHS3 compliant. The original 3M part does not specify RoHS status.

Q: What is the moisture sensitivity level for these connectors?

A: All parts, including the original 3M connector and all Samtec substitutes, are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.