Ohmite 95J82R Equivalent & Substitute Parts

Part Overview

The Ohmite 95J82R is an 82 Ohm, 5% tolerance, 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is suitable for general-purpose power dissipation applications requiring wirewound construction. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the specified tolerance and power rating ranges.

Substiute Parts

95J82R

OhmiteIn Stock: 104795J82R Datasheet

Current PartRFQ

95J82RE

OhmiteIn Stock: 105895J82RE Datasheet

Parametric EquivalentRFQ

25J82R

OhmiteIn Stock: 122925J82R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 95J82R are qualified based on matching the following critical parameters: 82 Ohm resistance value, ±5% tolerance, 5W power rating, wirewound composition, axial package configuration, and ±30ppm/°C temperature coefficient. All substitute parts maintain identical electrical performance specifications and mechanical form factor compatibility. Substitution is valid when these parameters are preserved across part variants.

Parameter Comparison

Engineering Selection Recommendations

The 95J82RE is a parametric equivalent with identical electrical specifications and mechanical dimensions to the 95J82R. The primary distinction is RoHS3 compliance status; the 95J82RE meets ROHS3 requirements while the 95J82R does not. Selection of 95J82RE is appropriate for applications requiring RoHS3 compliance.

The 25J82R is a manufacturer-recommended substitute that maintains all critical electrical parameters and mechanical compatibility. This part belongs to the Ohmite Series 20 and exhibits slightly larger physical dimensions (0.276" Dia x 1.016" L versus 0.264" Dia x 0.969" L). The 25J82R is suitable for applications where minor dimensional variation is acceptable and RoHS compliance is not required.

Frequently Asked Questions (FAQ)

Q: Can the 95J82RE be used as a direct replacement for the 95J82R?

A: Yes. The 95J82RE maintains identical resistance, tolerance, power rating, temperature coefficient, and physical dimensions. The primary difference is RoHS3 compliance status. Direct substitution is valid for electrical and mechanical compatibility.

Q: What is the significance of the dimensional difference between 95J82R and 25J82R?

A: The 25J82R exhibits a larger diameter (0.276" versus 0.264") and length (1.016" versus 0.969"). These dimensional variations may affect board layout and mounting clearance. Verify PCB footprint compatibility before substitution.

Q: Are all substitute parts manufactured by Ohmite?

A: Yes. All listed substitute parts—95J82RE and 25J82R—are manufactured by Ohmite and maintain the same wirewound axial resistor construction and safety features.

Q: Which substitute part should be selected for RoHS3-compliant applications?

A: The 95J82RE is ROHS3 Compliant and is the appropriate selection for applications requiring RoHS3 compliance. The 95J82R and 25J82R are RoHS non-compliant.

Q: Do all substitute parts have the same temperature coefficient?

A: Yes. All parts—95J82R, 95J82RE, and 25J82R—share an identical temperature coefficient of ±30ppm/°C, ensuring consistent thermal performance across substitutions.