Ohmite 95J800 Equivalent & Substitute Parts

Part Overview

The Ohmite 95J800 is an 800 Ohm, 5W wirewound axial resistor with flame retardant coating and safety features. This through-hole component is designed for applications requiring reliable power dissipation in compact form factors. The part maintains Active product status with 991 units currently in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set.

Substiute Parts

95J800

OhmiteIn Stock: 107395J800 Datasheet

Current PartRFQ

25J800

OhmiteIn Stock: 80425J800 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Ohmite 25J800 qualifies as a direct substitute based on the following criteria:

Electrical equivalence is established through matching resistance value (800 Ohms), tolerance (±5%), power rating (5W), composition (Wirewound), and temperature coefficient (±30ppm/°C). Both parts maintain identical functional characteristics for circuit performance.

Mechanical compatibility is confirmed through axial package type and two-terminal configuration. Physical dimensions differ slightly (95J800: 0.264" Dia × 0.969" L; 25J800: 0.276" Dia × 1.016" L), remaining within acceptable tolerance for standard through-hole PCB mounting applications.

Feature parity includes flame retardant coating and safety designation on both parts, ensuring equivalent environmental and safety performance.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J800 and 25J800 maintain Active product status, confirming ongoing manufacturer support and availability. Selection between these parts should be based on packaging requirements and inventory availability. The 95J800 is available in standard packaging with higher stock levels (991 units). The 25J800 is supplied in bulk packaging with 723 units in stock. Both parts carry identical RoHS non-compliant status and ECCN/HTSUS classifications, ensuring consistent regulatory treatment in procurement and supply chain documentation.

Frequently Asked Questions (FAQ)

Q: Can the 25J800 directly replace the 95J800 in existing designs?

A: Yes. Both parts share identical electrical specifications (800 Ohms, ±5%, 5W, ±30ppm/°C) and mechanical configuration (axial, 2-terminal). Physical dimensions vary slightly but remain compatible with standard through-hole PCB layouts.

Q: What are the key differences between these parts?

A: The primary differences are series designation (90 vs. 20), packaging format (standard vs. bulk), and physical dimensions. The 95J800 measures 0.264" Dia × 0.969" L, while the 25J800 measures 0.276" Dia × 1.016" L. These dimensional variations do not affect electrical performance or standard mounting applications.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical RoHS status (non-compliant), ECCN classification (EAR99), and HTSUS codes (8533.21.0080). Regulatory treatment is equivalent for both parts.

Q: Which part should be selected for new designs?

A: Selection depends on packaging preference and supply chain requirements. Both parts are functionally equivalent and maintain Active status. Verify packaging format compatibility with your procurement and assembly processes before final selection.