95J62R Equivalent & Substitute Parts

Part Overview

The 95J62R is a 62 Ohm, 5W wirewound axial resistor manufactured by Ohmite, part of the 90 series. This through-hole component features flame retardant coating and safety construction, designed for applications requiring reliable power dissipation in axial package format. The part is currently active in production with 1128 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative packaging or compliance requirements necessitate component substitution.

Substiute Parts

95J62R

OhmiteIn Stock: 119295J62R Datasheet

Current PartRFQ

95J62RE

OhmiteIn Stock: 124895J62RE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 95J62R is determined by strict equivalence across the following critical parameters:

• Resistance value: 62 Ohms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package configuration: Axial
• Physical dimensions: 0.264" Dia x 0.969" L (6.70mm x 24.60mm)
• Temperature coefficient: ±30ppm/°C
• Features: Flame retardant coating and safety construction

The 95J62RE meets all electrical and mechanical requirements for direct substitution. The primary distinction between the main part and its substitute relates to packaging format (tape and reel versus bulk) and RoHS compliance status, which do not affect functional performance in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J62R and 95J62RE are active production components from Ohmite's 90 series and are electrically and mechanically identical. Selection between these parts should be based on the following criteria:

95J62R is appropriate for applications where standard packaging is required and RoHS non-compliance is acceptable within the design constraints.

95J62RE is the preferred choice for applications requiring ROHS3 compliance or when bulk packaging format aligns with procurement and assembly processes. The higher inventory level (1190 units versus 1128 units) may also support extended lead time requirements.

Both parts are suitable for direct board-level substitution without circuit redesign or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can 95J62RE be used as a direct replacement for 95J62R in existing designs?

A: Yes. The 95J62RE is electrically and mechanically equivalent to the 95J62R. Both components have identical resistance values, tolerance, power rating, physical dimensions, and thermal characteristics. Substitution requires no circuit modifications.

Q: What is the difference between the 95J62R and 95J62RE?

A: The primary differences are packaging format (standard versus bulk) and RoHS compliance status. The 95J62R is RoHS non-compliant, while the 95J62RE is ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Does the packaging format affect circuit performance?

A: No. Packaging format (standard versus bulk) does not affect electrical performance or mechanical fit. The difference is in supply format and handling for assembly operations.

Q: Which part should be selected for new designs?

A: For new designs, the 95J62RE is recommended due to ROHS3 compliance, which aligns with current environmental and regulatory standards. Both parts are active and available in adequate inventory.

Q: Are there any thermal or environmental differences between these parts?

A: No. Both parts have identical temperature coefficients (±30ppm/°C), operating characteristics, and environmental features including flame retardant coating and safety construction.

Q: Can these parts be used interchangeably in automated assembly?

A: Yes, provided the assembly equipment is configured for the appropriate packaging format. The 95J62R uses standard packaging, while the 95J62RE uses bulk packaging. Physical dimensions and lead spacing are identical.