Ohmite 95J5R6 5.6 Ohm 5W Axial Wirewound Resistor Equivalent & Substitute Parts

Part Overview

The Ohmite 95J5R6 is a 5.6 Ohm, 5% tolerance, 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status with 859 units currently in stock. Equivalent and substitute parts are identified to provide procurement flexibility, support supply chain continuity, and accommodate specific packaging or compliance requirements in electronic assembly applications.

Substiute Parts

95J5R6

OhmiteIn Stock: 88095J5R6 Datasheet

Current PartRFQ

95J5R6E

OhmiteIn Stock: 102195J5R6E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 95J5R6 are identified based on strict electrical and mechanical parameter matching. The primary substitution criterion is parametric equivalence: identical resistance value (5.6 Ohms), tolerance (±5%), power rating (5W), composition (Wirewound), package type (Axial), physical dimensions (0.264" Dia x 0.969" L), temperature coefficient (±100ppm/°C), and core features (Flame Retardant Coating, Safety).

The 95J5R6E is classified as a parametric equivalent substitute. Both parts share identical electrical specifications, physical dimensions, and functional characteristics. The distinction between these parts lies in packaging configuration and regulatory compliance status, not in electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J5R6 and 95J5R6E are Active status components suitable for direct substitution based on electrical and mechanical parameters. Selection between these parts should be determined by specific application requirements:

The 95J5R6E offers ROHS3 compliance, making it the appropriate choice for applications subject to RoHS3 regulatory requirements or end-market restrictions on hazardous substances. The 95J5R6 remains suitable for applications where RoHS compliance is not mandated.

Packaging configuration differs between the two parts: the 95J5R6 is supplied in standard packaging, while the 95J5R6E is supplied in bulk packaging. Procurement volume and assembly process requirements should guide packaging selection.

Both parts maintain identical electrical performance, physical dimensions, and thermal characteristics, ensuring direct functional interchangeability in circuit design and PCB layout.

Frequently Asked Questions (FAQ)

Q: Can the 95J5R6E directly replace the 95J5R6 in existing designs?

A: Yes. Both parts are parametrically equivalent with identical resistance (5.6 Ohms), tolerance (±5%), power rating (5W), physical dimensions (0.264" Dia x 0.969" L), and thermal characteristics (±100ppm/°C). Direct substitution is supported without circuit redesign or PCB layout modification.

Q: What is the primary difference between these substitute parts?

A: The primary differences are packaging configuration (standard vs. bulk) and RoHS compliance status (non-compliant vs. ROHS3 compliant). Electrical and mechanical specifications are identical.

Q: Which part should be selected for RoHS3-regulated applications?

A: The 95J5R6E is ROHS3 compliant and is the appropriate selection for applications subject to RoHS3 requirements. The 95J5R6 is RoHS non-compliant and should not be used in RoHS3-regulated end markets.

Q: Are the physical dimensions identical between 95J5R6 and 95J5R6E?

A: Yes. Both parts share identical dimensions of 0.264" Dia x 0.969" L (6.70mm x 24.60mm), ensuring compatibility with existing PCB footprints and assembly fixtures.

Q: What packaging options are available?

A: The 95J5R6 is supplied in standard packaging. The 95J5R6E is supplied in bulk packaging. Selection should align with procurement volume and assembly process requirements.

Q: Are both parts currently in stock?

A: Yes. The 95J5R6 has 859 units in stock, and the 95J5R6E has 926 units in stock, both classified as New Original inventory.